Mandrel bent 2.5" custom exhaust pipe 304 SS

For sale 2.5" inch mandrel bent 2.5" stainless steel exhaust pipe. Weighs about 14lbs vs over 70 for stock system.

Read about the benefits of mandrel bent vs. crush bend vs. multiple welds here:
http://e30m3performance.com/installs/insta...xhaust/exh1.htm

The pipe is made out of 304 SS, it has 6 bends and one TIG weld. It has about 12" of extra length on both ends.


Here's vid of the car with that system installed:
http://e30.us/video/OVR-11-1-2004-Alex.wmv
"Right click save as"

It is not very loud, but if I were to use it on the street I'd put a bit bigger muffler and maybe a resonator on it. In the vid car has a small Magnaflow muffler p/n 14326 which is 2.5 offset/2.5 center

Some pics here (you can see the muffler and a single tip):
http://www.teamsoloracer.com/photos/photos_2004.php

Pics are here. Headers are not included:
http://e30.us/images/exhaust/

$315 neg shipped to continental US.

Quote:

---

Originally posted by alex s:
For sale 2.5" inch mandrel bent 2.5" stainless steel exhaust pipe. Weighs about 14lbs vs over 70 for stock system.

Read about the benefits of mandrel bent vs. crush bend vs. multiple welds here:
http://e30m3performance.com/installs/insta...xhaust/exh1.htm

The pipe is made out of 304 SS, it has 6 bends and one TIG weld. It has about 12" of extra length on both ends.


Here's vid of the car with that system installed:
http://e30.us/video/OVR-11-1-2004-Alex.wmv
"Right click save as"

It is not very loud, but if I were to use it on the street I'd put a bit bigger muffler and maybe a resonator on it. In the vid car has a small Magnaflow muffler p/n 14326 which is 2.5 offset/2.5 center

Some pics here (you can see the muffler and a single tip):
http://www.teamsoloracer.com/photos/photos_2004.php

Pics are here. Headers are not included:
http://e30.us/images/exhaust/

$315 neg shipped to continental US.

---

Hey Alex:
I am interested in talking to you about this exhaust. Can you email me at anthonywill3 at comcast.net
Thanks!
Tony

[This message has been edited by anthonywill3 (edited December 31, 2004).]

tony,
you NEED this! ;-)

marshall

Is this pipe still for sale? Is it the correct bend for any E30, it appears to be? If you have sold it would tell me who bent it for you?

Thanks, Ian

Alex,

Are you going to respond to the post?

Ian B

Quote:

---

Originally posted by ianb:
Alex,

Are you going to respond to the post?

Ian B

---

I beleive I may have bought the last one...

Thanks for your reply. By any chance, do you know where the pipe came from or who bent it?
Thanks, Ian

Ian, sorry I haven't checked the responses for a while. I had a shop in columbus, OH bent it for me. If there's interest I can have some more made.

Alex,
I am interested in this pipe. Is there somewhere I can contact you? You reach me at [email protected].
Regards, Ian

Ian, I sent email.

My email is [email protected]