Printable View
The legal plates are just in, $25 for anyone that needs one come Jan 1.
http://www.nexternal.com/bimmerworl/?Product=538
------------------
-----------------------------------------------------------
James Clay
http://www.bimmerworld.com
http://www.bimmerworldracing.com
Engineered BMW Performance
2003 ITS ARRC Champions
(540) 639-9648
-----------------------------------------------------------
you're a funny guy james! http://Forum.ImprovedTouring.com/it/smile.gif
you will be getting my order soon....
marshall
Ha! I *pre*-ordered mine!!! http://Forum.ImprovedTouring.com/it/biggrin.gif
[This message has been edited by snk328is (edited December 21, 2004).]
Hello James, whats your take on the "unrestricted" 2.5 in the 323 e46, can it be made to overcome the extra weight? chassis should be better?
Gotta admire the lemonade maker!Quote:
Originally posted by James Clay:
The legal plates are just in...
HI James,Quote:
Originally posted by James Clay:
The legal plates are just in,
Can you share any ball park figures on these "slow parts" dyno er...% wise, what kinda difference expected, versus actual.
David Spillman
Bet they don't lose as much as you did on your last valve job. Bwah Hah Hah. http://Forum.ImprovedTouring.com/it/tongue.gifQuote:
Originally posted by dspillrat:
HI James,
Can you share any ball park figures on these "slow parts" dyno er...% wise, what kinda difference expected, versus actual.
David Spillman
------------------
katman
Not Funny.... http://Forum.ImprovedTouring.com/it/frown.gifQuote:
Originally posted by kthomas:
Quote:
Originally posted by dspillrat:
HI James,
Can you share any ball park figures on these \"slow parts\" dyno er...% wise, what kinda difference expected, versus actual.
David Spillman
Bet they don't lose as much as you did on your last valve job. Bwah Hah Hah. http://Forum.ImprovedTouring.com/it/tongue.gif
I need to vist region of the South and Southwest US
David
[This message has been edited by dspillrat (edited December 22, 2004).]
Anyone got a picture of these plates? Who's received theirs so far?
I race two classes; ITS and production class that doesn't require a restrictor plate. How easy is it to remove the plate and replace it? Will I just pop-off a hose, or must I un-bolt the plate from the output side of the the throttle?
.B ekiM
the plate is very easy to install and remove maybe 3 minutes tops.you really lose top end power.have fun.
------------------
steve saney
it-7 /it-a #34
Steve,
Nice talking with you on the grid Saturday. Carlos' car looks very good. It seemed really fast too. See you soon.
Jim
{edited-so not to be viewed as a "typical" IT.COM post)
[This message has been edited by its66 (edited January 21, 2005).]
yes that was with the plate.but we are still fine tuning,it should be better for march at moroso.still not 100% happy with the suspension tuning.
Quote:
Originally posted by its66:
Steve,
Wow, If last weekend is what happens with the plate, then I would hate to see Carlos' car without it. In Saturday's race, CG's fastest lap was over 1/2 second faster than Mike V.S.'s.
Jim
Jim, classic IT.com post. No mention of the fact that MVS easily won the race (not sure Mike even broke a sweat), or that his RX7 has regularly run 2 seconds a lap faster than his best lap in that race. http://Forum.ImprovedTouring.com/it/tongue.gif
that is true bruce .so please no more weight or resrtictor plate.
mike won the race because a car about to be lapped and not looking in his mirrors was surprised by mike passing him .so the guy spun in front of carlos he took evasive action to avoid hitting the guy .needless to say mike was gone by that time.but yes we got our a-s kicked.
------------------
steve saney
it-7 /it-a #34
ok, maybe my original post was a little "tongue in cheek". I've revised it to correct my evil ways. http://Forum.ImprovedTouring.com/it/smile.gif
But, Carlos ran a 2"33.9. That is a respectful lap that either you or I would be happy with. And, with the further suspension tuning that Steve mentioned, the car should get faster (low 33's or 32's maybe). So, from my point of view, the restrictor plate did not take the ability to win away from the E36. The suspension development will put that car right with the other fully developed cars. That is where a top notch car should run.
I realize that none of the E36 guys are happy about the restrictor plate. I'm sure you realize that everyone else in ITS is happy about the plates. Would you expect it to be any different? I don't.
Jim
carlos is willing to spend the money it takes to develop the car even further with the restrictor plate and the only way is with the suspension.i am not a bmw engine guru.i know a little about suspension so that where i develop.
------------------
steve saney
it-7 /it-a #34
> very easy to install
I'm not much of a wrench. The plate arrived and looks great, but I haven't a clue of where it goes and it didn't come with any paperwork. At all.
Am I to bolt it on the intake side of the throttle body, or the manifold side? I don't think I'll be able to remove it or add it when the car is hot, between classes.
Maybe it'll actually be obvious when I have time to have a close look at the car.
.B ekiM
It says in the GCR where to place your RP.
AB
its obvious. between manifold and tb. bmw gasket on one side and something like hylomar on the other to seal it. if you have q's, just call or email bimmerworld.
marshall
i got the gift....
The intake should be easy to change between sessions. There shouldn't be anything to burn you around the intake.Quote:
<font face=\"Verdana, Arial\" size=\"2\">I don't think I'll be able to remove it or add it when the car is hot, between classes.</font>
why is the bimmerworld one $25.00 and the sunbelt one $125.00Quote:
Originally posted by James Clay:
The legal plates are just in, $25 for anyone that needs one come Jan 1.
http://www.nexternal.com/bimmerworl/?Product=538
Stephen
Looks to me like the Bimmerworld piece is the restrictor, while the Sunbelt piece is the optional spacer.
correct!
Why is the spacer legal? Is it in front of the MAF? If not, isn't it illegal?
The restrictor plate rule specifically mentions the the spacer as optional in order to make room for the butterfly to open, thus making it legal.
[This message has been edited by Bryan Watts (edited February 06, 2005).]