Printable View
Is it legal to box in the radiator so all the air entering through the grill goes through the radiator and doesn't escape around the sides?? Don't see any mention in the GCR
"Any radiator may be used, provided it is mounted in the original location, maintains the same plane as the original core and requires no body or structure modifications to install."
So does moving the radiator 3 inches to the right and drilling two new holes count as legal or illegal?
yes, if it is in the confines of the original aperture. Any shrouding to block the original opening can be mounted to the (VW) radiator quite adequately (aluminum sheet metal trimmed w/1700 Bus engine compartment skirt mtl or Volvo door gasketing). phil
Doesn't sound like it would be in the original location to me...Quote:
Is it legal to box in the radiator so all the air entering through the grill goes through the radiator and doesn't escape around the sides?? Don't see any mention in the GCR
"Any radiator may be used, provided it is mounted in the original location, maintains the same plane as the original core and requires no body or structure modifications to install."
So does moving the radiator 3 inches to the right and drilling two new holes count as legal or illegal?[/b]
as for adding a box to "trap" the air into the radiator, I feel it is legal as long as it is considered part of your "new" custom radiator as long as the added material doesn't alter the body or structure to install it.
Raymond
Additionally, those that run a splitter w/ undertray could mount the shrouding to the legal undertray and accomplish the same thing. It makes the installation of the splitter/undertray a bit more difficult unless permanently mounted.Quote:
...I feel it is legal as long as it is considered part of your "new" custom radiator as long as the added material doesn't alter the body or structure to install it.[/b]
when the new radiator is 3" shorter you can move it 3"
Someone pointed out to me, just attach the air shroud to something that is "free" -- either the spoiler/undertray/splitter or to the radiator itself.
By the way, although my car is an oddball, you guys might find it interesting that a good shroud and "director" that I have attached as a spoiler knocked about 30 degrees of my temps. Incredible improvement.
The rule actually says
original location
same plane as original
no structural modifications
Holes and mounting brackets are not structural modifications. Next thing you know the same folks that tell us a driver seat constitutes a cage mounting point will tell us that we have to trap our radiators in place instead of bolting them :wacko:
Same plan covers your smaller radiator.