Printable View
Hi everyone,
I need some advice on which intake to buy for my (almost)ITA Miata.
Modifying my SM with the following:
Kessler ITA head (leaving the bottom end of motor alone)
Megsquirt Gen 2 ECU
Stahl header
Probably keep the SM muffler for now.
I have lloked at the ISC Racing, Racing Beat and the Jackson Racing ones.
Will appreciate any advice.
Thanks
Abhi
It's the one you make yourself...after trying all those!
Seriously, get any of them. Peak power won't change much at all. Doing the custom one on a dyno will just move your torque numbers around.
Go with Mike's. It's good.
Would that be ISC Racing ?Quote:
Originally Posted by Andy Bettencourt
Abhi
Yes , That would be ISC
I've got the ISC on my 95 , I also wrapped the tube in heat resistant / reflective tape and built a heat shield to keep some of the heat away from the air filter.
We recently bought one for a 99' on ebay (less than $30.) and modified it, seems to work fine.:shrug:
What's your definition of 'work fine'?Quote:
Originally Posted by ner88
Didn't leak or fall off......:lol:
Ah yes. So Abhi, that one is the 'best'. :DQuote:
Originally Posted by ner88
Got it Thanks. I'll just head down to the junk yard in Lawrence MA, and pick one up. With a big enough hammer I can make one of those Honda ones fit. :):)Quote:
Originally Posted by Andy Bettencourt
Abhi
Are under drive pulleys legal in ITA ? Do they really improve throttle response ?
Abhi
Quote:
Originally Posted by Abhi
Read the GCR ITA Newbie!!!
:p
See, aren't we so much more fun than SM??
.
See if I ever offer you any free advice again! :DQuote:
Originally Posted by Abhi
Free advice: $0Quote:
Originally Posted by ner88
Advice: $5
Good Advice: $10
and the truth is priceless!Quote:
Originally Posted by Andy Bettencourt
Ask the same question 3 times,If you get the same answer 3 times,It might be true.
At least thats what they say about me and my answers:shrug: Free advice