Printable View
Hi All!
I'm about to install a kill switch in my 325is (getting it ready for ITS), and I have been doing some researching and asking around with regards to its installation.
Marshall is going to send me some pictures which will hopefully clear things up, but in the meantime, I've come up with the following "schematic" based on some of the aforementioned research.
Does it look right to you folks?
Thanks in advance!
http://home.comcast.net/~snk328is/ki...tch-wiring.jpg
Yes, just remember the switch must be accessable from outside the car. I mounted mine through the grill opening below the windshield left side of the car (e30). Some sheet metal needs to be removed to access the bottom of the switch but the location is great
------------------
Chuck Baader
#36 ITA E30 BMW
Alabama Region Divisional Registrar
Thanks Chuck!
I read your thread from two years ago or something that gave me the inspiration to photoshop the picture. http://Forum.ImprovedTouring.com/it/smile.gif
I am planning on mounting the switch inside the cabin on the driver side A-pillar area. That way the switch will be shielded from the elements and hopefully will also deter anybody from messing with it when the car is parked outside.