Alignment Settiugs for 1991 Honda Civic ITC car

Hello All,

I was wondering if anyone had some input about the alignment settings for a 1991 Honda Civic ITC car running on Hoosier R6s.

My thinking is that I would want to get as much camber in the front as I can get, about 1/8 toe out and wherever the caster comes in from there.

In the rear I was thinking about 1 degree negative camber and about 1/8 toe in.

However, I would defer to someone with more knowledge and any input would be greatly appreciated.

Thanks in advance.

Brian Heun

What are your spring rates? Also, I believe Kevin Ruck, Ed Funk and others will have some great input for you considering they have good experiences with the EF.

Thanks. Not sure on the spring ratings but will try to find out. It is actually not my car.

Thanks again,

Brian

Update: The owner thinks they are in the 500 to 600 pound range.

Actually just got some excellent advice from Roger Troxell so I think I'm good.