D16 hondata or PM6?

[Jtmurr02]

Are there reasonable enough gains to justify getting an s100
for an ita built d16a6??

i have asked some motorsport companies but they don't always have
first hand experience?

so...

should i run a stock pm6
or hondata s 100/300


thanks in advance
:cavallo:

[mossaidis]

Unless you convert to ODB1 from ODB0, I don't think you can use Hondata on a d16a6 motor. Most folks in IT run stock ecu or megasquirt on ODB0. Ed Funk and/or others would know best. Your other option would to check out www.d-series.org for ECU/wiring options, yet 99.999999% of folks there know nothing about the IT rules set.

[DaveOH32]

Unless you convert to ODB1 from ODB0, I don't think you can use Hondata on a d16a6 motor. Most folks in IT run stock ecu or megasquirt on ODB0. Ed Funk and/or others would know best. Your other option would to check out www.d-series.org for ECU/wiring options, yet 99.999999% of folks there know nothing about the IT rules set.

What he said. Hondata only works with the OBD1 dizzy/ecu. My ITA CRX has a megasquirt in it currently. Looking at other options though.

[mossaidis]

Talk to the Acid Beaver at d-series.org.

http://www.d-series.org/forums/members/the_acid_beaver-14805.html

He's got rep with ODB0 engine ecu mods and options.

[webhound]

I haven't burned a chip or tuned yet, but I had a friend put in a zif socket, data logging header and EEPROM into the PM6 ecu. The parts are on xenocron's website, iirc. I think I'll be using turboedit to tune.

[bamfp]

I have an old Zdyne ECU for sale. The only thing I don't have is the cable for it. It is easy to make one. I just need to get the pin outs for it.

[adamjabaay]

I've been tuning with turboedit on obd0 since it came out, and its pretty good...

my ita car is currently tuned with it too...