PDA

View Full Version : where do you get open end steel lug nuts!



StephenB
10-15-2013, 01:12 PM
Ya I know ed is going to say something about my nuts... but I need new ones and it l looks like most places ask have closed tops. I want normal ones that all the other racers have! :-)

Stephen

chuck baader
10-15-2013, 01:26 PM
What size/thread. Most auto parts stores will have the standard size nuts...go nuts!!

Ron Earp
10-15-2013, 01:27 PM
Summit
Jegs

My local Advance Auto has some extremely good open ended ones under a Dorman brand. They are higher quality than the plated ones you typically find. But, we have 1/2"-16 thread which is very common.

joeg
10-15-2013, 01:31 PM
Ebay

240zdave
10-15-2013, 02:28 PM
I found a pretty good selection here:

http://www.brandsport.com/excl-98-0003.html

Also, as mentioned before, Summit and Jegs.

JohnnyH
10-15-2013, 03:16 PM
I just got a new set a few months ago from here: http://www.track-studs.com

Great prices, but they get you on the shipping. They may still be an IT forum sponsor.

chuck baader
10-15-2013, 03:52 PM
You can actually find forged aluminum on ebay...been running them for 10+ years (SAME SET!!!)

Dano77
10-15-2013, 04:22 PM
CARQUEST Manchester NH

Advance Raymond NH

Sanel Auto Parts Raymond NH

12mmx1.5 Thread pitch. 19mm head

2000 Chevy Impala with steel wheels.

Or should I just get them and drop them off at your house???:rolleyes:

Dan
77 IT7

lawtonglenn
10-15-2013, 11:26 PM
summit

http://www.summitracing.com/parts/rnb-611-063/overview/

Matt93SE
10-15-2013, 11:29 PM
I buy mine a couple sets at a time from Summit. always need spares, especially when working on the car in a muddy paddock!

StephenB
10-15-2013, 11:55 PM
I procrastinated and didn't want to buy on line. I have been to the pep boys and auto zone type places but they didn't have the open end type. I will check those places Dan mentioned.

Oh I also want 17's. Not 19...

Thanks for all the replies!

Chip42
10-15-2013, 11:57 PM
gorilla brand is usually available from amazon, tire shops, summit, etc.... they make 12*1.5 opens in 17mm hex with a bulge 60° conical seat (30037B, ~$7/pack of 4, 30038, ~$70/pack of 100). we run them on the MR2s.

tdw6974
10-16-2013, 08:01 AM
gorilla brand is usually available from amazon, tire shops, summit, etc.... they make 12*1.5 opens in 17mm hex with a bulge 60° conical seat (30037B, ~$7/pack of 4, 30038, ~$70/pack of 100). we run them on the MR2s.
Got ours through amazon also good selection of sizes and QUICK ship!

monsterbronco
10-16-2013, 02:15 PM
Call flatout, got 40 17mm shipped to me for pretty cheap last year. also they will be at the 13hr

Wreckerboy
10-17-2013, 05:32 PM
Dorman Auto Products (http://www.dormanproducts.com/default.aspx) is your friend. This is the company that supplies most of the loose stock you see in the steel bins behind the counter. The web site is a little bit clunky, but with a little searching you can find what you want and then use the site to figure out what auto parts stores in your area stock the stuff. For example, my Spec Miata uses the lug nuts from a late model Ford Fusion (open ended, 19mm, steel, dirt cheap). I buy a dozen or so at a clip.