View Full Version : Miata Speedo Cable Removal
pitbull113
03-31-2012, 07:11 PM
I have a '94 Miata and the speedo is removed so if I unplug the cable at the trans. will it leak and if so what can I do to plug the hole? TIA
tyler raatz
03-31-2012, 07:51 PM
I used an electric speedo speed sensor from a 99-05. Direct bolt in, plugs the hole, no fab required.
pitbull113
04-01-2012, 12:06 PM
I used an electric speedo speed sensor from a 99-05. Direct bolt in, plugs the hole, no fab required.
Thanks Tyler, $103 from mazdaspeed is a little steep I was hoping for a cheaper alternative
JohnW8
04-02-2012, 10:36 AM
Thanks Tyler, $103 from mazdaspeed is a little steep I was hoping for a cheaper alternative
Buy a used one from a Miata Salvage yard.
www.partsgroup.com
www.planetmiata.com
www.mazmart.com
etc., etc
jrx13
04-04-2012, 12:51 PM
Cut the cable really short on the transmission side and leave the whole gear assembly in the transmission? That's how the RX7 people used to do it.
mazdagt3
04-05-2012, 07:37 AM
Buy a used one from a Miata Salvage yard.
www.partsgroup.com
www.planetmiata.com
www.mazmart.com
etc., etc
We have them in stock.
Call 866 296 1100 to order.
Marc
Rabbit07
04-08-2012, 09:45 AM
Not sure on the MIata, but on the RX-7s I have used a core plug (freeze plug) 27 or 28 mm if memory serves. less than a dollar at Napa.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.