Cheap Vinyl Cutter

[Ron Earp]

I bought a vinyl cutter for one of our crew a few years ago and he's been keeping a number of us SE racers in graphics. However he moved away and I don't have access to vinyl services any longer.

I'm looking to buy a basic cheap unit like I did some years ago. I remember spending about $300 on the old unit and it did everything that we needed it to do while only costing maybe 2x what one of our graphics jobs costs from a vendor. Over the years the flexibility and savings more than makes it worthwhile to just own a unit.

Does anyone have any suggestions for a good unit with reasonable Windows software?

[StephenB]

I have one from JSI Sign systems. Cheap and the software is great to use. Lot's of options including vectorization! I make all my own stuff for the same reasons you mentioned. I also make them for FREE to anyone local as long as they purchase the roll of vinyl needed for the job. (About $30 bucks usually.)

Stephen

www.jsisigns.com

[raffaelli]

I have a Roland Sticka 8". Perfect.

[Ron Earp]

I think I'd like to be able to do stuff larger than 8". 24" seems to be a good size but one does pay a bit for it. Any other suggestions?

[Ron Earp]

Expert 24, fo fiddy on Ebay. Good or bad?

http://cgi.ebay.com/GCC-Expert-24-Vinyl-Cutting-Plotter-/290487530115?pt=LH_DefaultDomain_0&hash=item43a267f283

[raffaelli]

Never heard of that brand.

I have done the entire racecar with the 8". Whatcha doing thats bigger?

[Ron Earp]

Never heard of that brand.

I have done the entire racecar with the 8". Whatcha doing thats bigger?

My numbers are generally two feet high. Corner workers dig it.

http://www.gt40s.com/images/Zforsale/daytonasf.jpg


Roof, sides, big skull.

I suppose I could piece them together but it is really easy cut one, put on the backing sheet, then apply it all in one piece.

[Flyinglizard]

http://cgi.ebay.com/New-19-Sign-Vinyl-Cutter-Crafts-Scrapbooking-TShirts-/230629700416?pt=LH_DefaultDomain_0&hash=item35b299f340
Anyone have one of these??
The phone # actually goes to a person that speaks english and takes time to answer questions about the product. That right there is a good thing for me.
The 31 in is 399$ with the software.
MM

[Ron Earp]

The 31 in is 399$ with the software.
MM

This one?

http://cgi.ebay.com/Your-Best-Value-SignMakers-Vinyl-Cutter-Sign-Plotter-/230627093294?pt=LH_DefaultDomain_0&hash=item35b2722b2e

Looks like $289 and a smoking deal. It appears to have the same software as the little one. I should by it up and start putting graphics on.

[Mazmarc63]

My numbers are generally two feet high. Corner workers dig it.

http://www.gt40s.com/images/Zforsale/daytonasf.jpg


Roof, sides, big skull.

I suppose I could piece them together but it is really easy cut one, put on the backing sheet, then apply it all in one piece.

And I did all the graphics on the other car in this pic with a Roland P1000 18" that I paid $250 for (used) 8 years ago. My only advice Ron is get something that has some speed to it...and maybe go with 18" numbers.:D