PDA

View Full Version : Best Neon header?



marka
11-17-2010, 03:50 PM
Howdy,

I need to do a little exhaust work to quiet my car down and get rid of the crush bends on the exhaust pipe.

It occurs to me that I might want to ditch the mid-length header I have today, and I'd rather not fab stuff for to match up to a header I don't want to run.

Is there an accepted "best one" header for a '95 SOHC ITA Neon? The Kirk Racing long tube is attractive at around $200, but I'm not sure what other options are out there I should be looking at.

The current header I have is a midlength header, but I'm not sure of the brand.

Car has the stock 3.94 final drive, it if matters, with the mopar performance ECU. On track the 2->3 shift seems to put the rpms in 3rd just below the power curve based on seat of the pants.

Appreciate any pointers!

Mark

Darryl Pritchett
11-17-2010, 08:03 PM
TTI long tube header. Great quality, great performance.

cjb25hs
11-17-2010, 08:07 PM
Mark, here is a link to the only place i know that still sells the tti header

http://chucker54.stores.yahoo.net/neonheaders.html

Streetwise guy
11-18-2010, 12:32 AM
I third the TTI. Beautiful, sturdy construction. Head to the bottom of the page.

http://www.ttiexhaust.com/HEADERS.htm#neon

marka
11-18-2010, 01:15 AM
Howdy,

Thanks for the info folks.

Do I want the thermal coating as well, or just the bare header? I'll spend the extra if it helps performance, but obviously would rather save the $100+ if it doesn't do much.

Mark