Alignment Settiugs for 1991 Honda Civic ITC car

[Brian Heun]

Hello All,

I was wondering if anyone had some input about the alignment settings for a 1991 Honda Civic ITC car running on Hoosier R6s.

My thinking is that I would want to get as much camber in the front as I can get, about 1/8 toe out and wherever the caster comes in from there.

In the rear I was thinking about 1 degree negative camber and about 1/8 toe in.

However, I would defer to someone with more knowledge and any input would be greatly appreciated.

Thanks in advance.

Brian Heun

[mossaidis]

What are your spring rates? Also, I believe Kevin Ruck, Ed Funk and others will have some great input for you considering they have good experiences with the EF.

[Brian Heun]

Thanks. Not sure on the spring ratings but will try to find out. It is actually not my car.

Thanks again,

Brian

Update: The owner thinks they are in the 500 to 600 pound range.

[Brian Heun]

Actually just got some excellent advice from Roger Troxell so I think I'm good.