View Full Version : pulleys on 2nd gen
monsterbronco
08-19-2010, 07:56 AM
i have one set of the double belt pulleys for the car (came with the car) i am assembling a spare motor, where do these pulleys come from?
thanks,
Wes
mbuskuhl
08-19-2010, 08:55 AM
Racing Beat made dual pulleys if yours look like these:
http://www.racingbeat.com/Mazda-Performance-Parts.html?PartNumber=11469
http://www.racingbeat.com/Mazda-Performance-Parts.html?PartNumber=11479
seckerich
08-19-2010, 02:32 PM
Run the single set from Mazdaspeed, no need for 2 belts.
Mazmarc63
08-19-2010, 06:45 PM
What Steve said Wes. He knows what he is talking about. Just ask him.:D
C. Ludwig
08-20-2010, 01:33 AM
Run the single set from Mazdaspeed, no need for 2 belts.
+1.
monsterbronco
08-20-2010, 08:11 AM
ok thanks for the help guys!
monsterbronco
01-15-2011, 09:02 PM
ok so I am finally getting around to looking into this again. mazdaspeed sells the drive pulley and the water pump pulley. does the stock alternator pulley get used then?
thanks!
Wes
seckerich
01-15-2011, 09:21 PM
You can, we don't. It is still a little small for what you can get away with.
Missed your response Mark, I will find you at Daytona.:D
monsterbronco
01-15-2011, 09:29 PM
what should i run on the alternator then?
thanks
monsterbronco
01-19-2011, 08:23 PM
Called Mazda Motorsports for the alternator wasnt listed with the other pulleys. for reference the part number is
0833-78-153A
Thanks for all the help!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.