PDA

View Full Version : What is the bolt pattern for a 2nd Gen Rx7?



gpeluso
11-18-2009, 11:25 AM
I know the car I got is a 5 bolt but not sure on the proper bolt pattern..... and most disired offset? The car came with a set of ssr's but I can't tell by the markings. The car has 3 different sets of wheels and I would like to get atleast 2 dry sets the same.

Thanks
Greg

C. Ludwig
11-18-2009, 11:47 AM
5 x 114.3 or 4.5". Ideal offset will vary but +25 or so is ideal. You'll be hard pressed to find an off the shelf wheel with that though. Most are in the +35-40 range and require spacers to work with 225 width tires.

xr4racer
11-18-2009, 06:23 PM
94-98 Mustang V6 wheels 24mm offset, perfect, no spacers needed. Around 13lbs. Dirt cheap on craigslist etc. 3 spoke for good ventilation.

matt