VW Porsche tools

[dave parker]

So it is the time of year that my boss has me cleaning up the machine shop in preparation for "motor building time". Today I found a box of VW/Porsche specialty tools that I cannot identify. Here is the list:
Porsche tool number
00072191112
Matra VW tool number Description
VW 34 Spring Compressor
VW 112/2
VW 202D
VW 271/2
VW 287
VW 288C/2
VW 299
VW 380/3
VW 382/1
VW 654
VW 661-2 Oil Cooler Pressure Tester
VW 664
VW 664/1
VW 690
VW 693
VW 694
　
Zelenda Machine tool number
US270A
US289D

Anybody care to take a stab at what these are and what they might be worth?

cheers
Dave Parker

[Greg Amy]

http://www.floridatools.net/VW%20TOOL%20NUMBERS%20%28OLD%29.asp

I'd be interested in the whole lot, but I suspect they'd be better served with someone like Conover.

[lateapex911]

the porsche tool is an engine removal tool. If you can shoot me a picture, or post it here, I'd be interested.

[T Broring]

Dave, according to the Baum Tools site, several seem to be aircooled VW. Here is a link to their catalog:
http://www.baumtools.com/pdf/VW_Aircooled_Catalog_sm.pdf

[dave parker]

Ok group,
I have spent the last two weeks on two different 911 motor rebuilds so I have been a little occupied.
I have found another box of these VW/Porsche tools in the mean time.
Here is an updated list of what we have.

TEXT IN NAVY IS SECOND BOX
Porsche tool number
00072191112
00072137500 (new in package)
00072191400 (new in package)
00072108500 PRESS TOOL (for removing front wheel bearings 928) (new in package)
00072129900
00072191800
00072191380 VALVE SPRING GAUGE (valve spring tension adjusting device) (new in package)
00072191020 (new in package)
Matra VW tool number Description
VW 34 Spring Compressor
VW 112/2
VW 202D
VW 182 (two of these)
VW 271/2
VW 287
VW 288C
VW 288C/2
VW381
VW 299
VW 380/3
VW 381
VW 382/1
VW383
VW 654
VW 661-2 Oil Cooler Pressure Tester
VW 664
VW 664/1
VW 690
VW 693
VW 694
　
Zelenda Machine tool number
US270A
US289D
9109
9114/1 ADAPTERS (for checking CIS system with VW1318) (new in package)
9125 ARBOR (for installing front crankshaft seal) 928
9126 ARBOR (for installing rear crankshaft seal) 928 THERE ARE TWO OF THIS
9130 FLYWHEEL RETAINER (for locking flywheel in place)
9140 PULLER (transmission shaft)
9142 RETAINER (locking device for transmission shaft nut) 928
9143 WRENCH (special wrench to disassemble and assemble pinion)
9144 HOLDER (for removing and installing transmission shaft)
9145 BUSHING (measuring differential in conjunction with VW521/4)
9149 SUPPORT (for mounting transmission with P201)
9162 TRANSMISSION HOLDER (fixture for mounting transmission in engine stand)
9148 SUPPORT (press tool to disassemble transmission shaft)

Most of these have not been used much however, I have noted the ones that are new in the package.
Again I am not sure what they are worth, so I will be happy to pass any offers to my boss for approval.
Since we do a lot of 911 stuff he may want to keep some of those tools, but I will leave that choice to him.

cheers
dave parker

[dave parker]

Tom
I have tried several times to access the Baum tools pdf file here at work with no luck.
I will try it from home and see what info it offers.
Thanks
Dave