PDA

View Full Version : Oil sensor fitting


wepsbee
08-22-2009, 09:56 AM
I am trying to install a new oil pressure gauge in a 95 Ford Escort GT which has the Mazda 1.8l engine. I have purchased and tried 3 different adapter fittings all of which do not quite have the corrct thread. Everyone with a Protege or Miata must have already performed this procedure. Does anyone have a source and part # for this part or should I be installing this in another spot rather than the Oil Pressure sensor in the back of the block.
C. Ludwig
08-22-2009, 12:44 PM
Believe the correct thread is 1/8" BSP. Pegasus has what you need.
seckerich
08-22-2009, 12:55 PM
Chris is correct. We have cut off the old brass sending unit in a pinch and tapped it 1/8 pipe to fit a gauge before. The block is 1/8 bsp.
wepsbee
08-22-2009, 01:53 PM
Believe the correct thread is 1/8" BSP. Pegasus has what you need.

Thanks for the help.




Chris is correct. We have cut off the old brass sending unit in a pinch and tapped it 1/8 pipe to fit a gauge before. The block is 1/8 bsp.

Great idea!!!!
bonespec
08-23-2009, 03:06 AM
#1073 + Tee fitting if you wish to keep OEM idiot light.

http://www.pegasusautoracing.com/productdetails.asp?RecID=56