PDA

View Full Version : A Tricked Out Open Race Trailer



Ron Earp
06-26-2009, 09:18 PM
I've had a few PM's and comments on my new race rig I put into operation this year. Seems a lot of people like it, or at least think it is weird and comment worthy, so I thought I'd post a few pictures and details.

I designed the trailer and had most of it done for me, that is the welded stuff, while I handled all the paneling, electrical, and interior.

I wanted a small race trailer that would fit in my garage but offer most of the benefits of a full on enclosed race trailer. I wanted a lot of storage for parts, ways to keep tools at hand, power, and "ease of use", that is, a design that would make racing easy.

So what I came up with is built on an 18 ft open trailer with a 7000 lb capacity. It features



15 ft car loading area
4 water tight under deck storage compartments 6.5 ft x 2.2ft x 1 ft, lockable lids
A 5 ft x 4 ft x 8 ft box with tools and sleep quarters
3000 W power inverter with three marine deep cycle batteries for "self-powering".
100 W solar panel for charging with charge controller
Built in tool cabinet
Built in stereo/MP3 player W 80W speakers
Tire rack for 14 tires
20 gallon fuel tank with fuel hose for care fueling
Walk on observation platform
Hammock supports
Bike rack for the pit bike
Fold down aluminum ramps
Two spare tires
External 110V hookup
Internal 12V fluorescent lighting
Twin bed, full mattress and sheets, pillow
Fan
AC unit, 110V for when trailer is hooked to 110V (inverter system wouldn't power it but for a few hours)
Small 110V 120 psi compressor and 50 ft hose
Retractable 110V cord on reel, 40 ft
Ladder
Window and screen in sleeping quarters
Electric winch
Electric lift for tongue

And that is about it. It is an open trailer for the car, but I have plexiglas windows for travel. It gets a lot of looks in the paddock for sure. The best compliment came from Jeff who, while I slaved away on the trailer, said "Man, you need and enclosed trailer, you're going to hate this thing". But after he used it in the paddock he gave it high praise.

You can stretch out in the bed area because the tool box area is elevated about 14" allowing you to put your feet up in that area. The sleep area is about 7.5 ft x 4 ft and works well.

See what you think.

http://www.gt40s.com/forum/attachment.php?attachmentid=38619&d=1241746504

http://www.gt40s.com/forum/attachment.php?attachmentid=38621&d=1241746504

http://www.gt40s.com/forum/attachment.php?attachmentid=38614&d=1241746459

http://www.gt40s.com/forum/attachment.php?attachmentid=38620&d=1241746504

Ron Earp
06-26-2009, 09:20 PM
And some more pictures:

http://www.gt40s.com/forum/attachment.php?attachmentid=38617&d=1241746459

http://www.gt40s.com/forum/attachment.php?attachmentid=39640&d=1246066363

http://www.gt40s.com/forum/attachment.php?attachmentid=39639&d=1246066363

http://www.gt40s.com/forum/attachment.php?attachmentid=38622&d=1241746504

Ron Earp
06-26-2009, 09:21 PM
And one or two more:

http://www.gt40s.com/forum/attachment.php?attachmentid=38616&d=1241746459

Not everything was done at once, naturally, so there are some pictures that have some items missing. But she is about 100% complete now.

spawpoet
06-26-2009, 09:38 PM
Ron, that's pretty trick. You've packed a ton of features in a small package. What would you estimate the weight difference to be between what you have done and a similar sized enclosed trailer?? Also did you build the sleep/tool box from scratch or did you start with a pre-made storage box that you modified?

Ron Earp
06-26-2009, 09:48 PM
I had a local welder take a common 18ft open trailer and weld a steel tube box with hinged doors on the front of it. I then took that structure, paneled it, and created the insides.

It is heavy BUT that is also due to the fact that I am carrying every spare for my Z that I own. Those storage boxes have a lot of space and I've got a lot of metal in there - three complete differentials, tranny, lots of drums, four sets of calipers, uprights, springs, etc. and so on. I'd estimate I've got 900 lbs of spares on it. If you need it, I bet I have it.

The AC/DC system also weighs a lot. The three batteries are around 175 lbs, plus another 35 lbs for the inverter and more for the wiring. AC adds another 20-30 lbs. Lots and lots of tools. Two spares ads some weight.

Even so, without all of that it would weigh a bit more than my old 20 ft enclosed. But, it is balanced well and tows great. I kept a spreadsheet and totaled it up and I think it is around the 6500 lbs mark, give or take 300 lbs. The open had to be around 1200 lbs less but it also carried a whole lot less in the way of spares and tires.

Spinnetti
06-27-2009, 07:58 AM
Interesting - I've been considering how to do a open trailer to my liking too... Like the RC plane in the Garage... I'm a FW190 fan myself ;)

Are those ROTA wheels? I run the same size/offset and am shopping around for the lightest set I can find (have Panasport ultralights now)

betamotorsports
06-27-2009, 11:19 AM
That's pretty cool!

Ron Earp
06-27-2009, 02:29 PM
Those wheels are Spinwerks. They are fairly light, somewhere in the 11.5-12 lb range. The other wheels up on the trailer are the Koneig Rewinds, Panasports knock offs. Those come in at around 13.5-14 lbs and are good value for the money.

raffaelli
07-09-2009, 11:09 AM
Awesome. gonna copy.

Charles Perry
07-09-2009, 11:38 AM
Ron,
while at Kershaw last race I was looking at your trailer with Steve P., I asked him is Ron an engineer? He said yes and I said yep had to be by looking at your trailer!!
Charles

JeffYoung
07-09-2009, 11:56 AM
Actually, he's not an engineer. PhD of some sort..what is it Earp? Gadgetology?

That's it..PhD of Gadgetology.

Some work and some don't. That trailer, it works. After some adjustment, but it works. It's a nice piece.

jimmyc
07-09-2009, 12:56 PM
WOW..



ya that thing is the coolest thing i have seen in a really really really long time...

lateapex911
07-09-2009, 01:13 PM
OK, a couple questions. First, where does the back of the AC unit vent to? And what is the silver box in the "sleeping compartment" (Train lingo, sounds better) that your helmet is sitting on? And I think I read where you said your gas is part of the trailer??? hows that work?

You are very industrious Ron!

JeffYoung
07-09-2009, 01:59 PM
The silver thing is one of those storage boxes with race suit hangers you can get from Pegasus.

The gas is in the long red tank under the tire racks (second picture down). Even has its own hose and nozzle!

Not sure where the A/C vents.

Strippers are in the storage boxes in the bed of the trailer.

Ron Earp
07-09-2009, 02:00 PM
OK, a couple questions. First, where does the back of the AC unit vent to? And what is the silver box in the "sleeping compartment" (Train lingo, sounds better) that your helmet is sitting on? And I think I read where you said your gas is part of the trailer??? hows that work?

You are very industrious Ron!

Thanks for the comments, glad you like it.

The back of the AC goes where the small tool box is located (didn't have a recent picture with the AC, this thing happened over a period of two months, notice below no stereo and so on). To use the AC you leave the door open on the tool, or work side, of the trailer open. The big tool box actually is part of the AC support. Has a pan to catch water and a drain tube out the bottom.



http://www.gt40s.com/forum/attachment.php?attachmentid=38620&d=1241746504

One thing to note is I designed this trailer so that all work occurs out of the driver's side. I never understood why most trailers have the "work side" on the passenger side. Who wants to constantly step over their hitch when they get out of the truck to go open up the trailer?

Gas is held in the gas tank, mounted on the back side of the "box". Capacity is quite good. Has a hose, and is up high enough to gravity feed. I need to shorten the hose some. See the gas tank under the tire rack?

And the silver box is a normal helmet/shoe/suit rack that you can get off Ebay that is designed for race trailers.

Best thing about the whole rig is the stereo. I like having tunes in the paddock. I also installed a 5 gallon water cooler on the front of the trailer. Got tired of spending $15 a weekend on bottled water. Now I just fill it up before I leave home, throw in the ice from the fridge, and be done with it.

lateapex911
07-09-2009, 02:48 PM
Duh...it ASSumed the red tank under the tires was nitrogen. Just noticed the hammock too. Tell me don't lie around in that thing!

Ron: sipping non alch mai tai, swinging back and forth with a straw hat and surf jams in his hammock, "Jeff, don't forget to torque your calipers after your afternoon pad change! And remember to remove the blowers from the rear drums before you hit the track, the flaggers get tired of collecting them, and ..."

Jeff: :mad::mad1::rolleyes:

pballance
07-09-2009, 02:58 PM
You know, the more I look at Ron's trailer the more I like it. Hey Ron, you just need satellite internet/DirecTV onboard now. I can fix you up on both of those :)

Paul

JeffYoung
07-09-2009, 02:59 PM
I was an A No.1 Doubter, but I'm convinced. Thing works.

lateapex911
07-09-2009, 03:05 PM
You know, the more I look at Ron's trailer the more I like it. Hey Ron, you just need satellite internet/DirecTV onboard now. I can fix you up on both of those :)

Paul

True, yelling at Jeff while he works on the coolest IT car evar British category at teh minimum) while watching a 50" plasma HD broadcast of some cool race would be over the top, LOL

joeg
07-09-2009, 04:14 PM
Nice Garage!

irondragon
07-09-2009, 09:07 PM
Ron: Nifty trailer. You haven't missed anything that needs to be there.

But your comment about the '900 pds of spares' for the Z-car really got me.
After running 280Z's for years in the 12 hour enduro races I finally got a Miata.
First thing I noticed was that I was going to the track minus about a thousand pounds of car parts.
I still miss racing the Z, but I don't miss rounding up and transporting all the spares.
Best regards Bill Miskoe

Ron Earp
07-09-2009, 10:12 PM
Ron: Nifty trailer. You haven't missed anything that needs to be there.

But your comment about the '900 pds of spares' for the Z-car really got me.
After running 280Z's for years in the 12 hour enduro races I finally got a Miata.

What did you guys do about brakes??? We've been running Miatas in the VIR 13 hr for I guess five years now. New pads and you're good. But a Z? That would require some stock in Carbotech and Oompa-Loompas for brake changing.

spnkzss
07-14-2009, 08:24 AM
That is truly bad ass.

I do have to ask one question, what is the tongue weight on that thing? I thought "I" overloaded my tongue. :o

spawpoet
07-14-2009, 10:04 AM
What did you guys do about brakes??? We've been running Miatas in the VIR 13 hr for I guess five years now. New pads and you're good. But a Z? That would require some stock in Carbotech and Oompa-Loompas for brake changing.

Both times Guy, Greg, & Charles ran the 12hrs of Homestead in Guy's Z we only went through two sets of pads (changed just after the 6hr mark), and had to change drums around the 8 hr mark. The first year they ran though we found out what happens when you try to get one more stop out of a set of pads on a z. Not pretty, but it livens up the pitstops.

Ron Earp
07-31-2009, 02:26 PM
Tongue weight is damn high. Must have airbags and load levelers.

Here are more pictures as promised.

http://www.gt40s.com/images/trailer/t1.jpg

http://www.gt40s.com/images/trailer/t2.jpg

http://www.gt40s.com/images/trailer/t3.jpg

http://www.gt40s.com/images/trailer/t4.jpg

Ron Earp
07-31-2009, 02:26 PM
And a few more:

http://www.gt40s.com/images/trailer/t5.jpg

http://www.gt40s.com/images/trailer/t6.jpg

http://www.gt40s.com/images/trailer/t7.jpg

http://www.gt40s.com/images/trailer/t8.jpg

Ron Earp
07-31-2009, 02:27 PM
And some more:

http://www.gt40s.com/images/trailer/t9.jpg

http://www.gt40s.com/images/trailer/t10.jpg

http://www.gt40s.com/images/trailer/t11.jpg

Richy Gonzalez
08-02-2009, 11:58 PM
Got to give you props!