PDA

View Full Version : Jax chassis dyno


pitbull113
03-25-2009, 06:28 PM
Does anyone know of a reputable shop with a chassis dyno in or near Jacksonville Florida? TIA
pitbull113
03-30-2009, 03:01 PM
Okay how about within 100 miles or so. help!
quadzjr
03-30-2009, 06:04 PM
are you wanting to do the tuning or do you want some to do it for you? We use one here in longwood area. I think it is 100 bucks for the first hour then 60 for every one after.
pitbull113
03-30-2009, 07:51 PM
I'm not sure what I can tune other than the timing and a/f ratio. I'm installing a new engine and want to make sure all is good before it hits the track. The a/f is my main concern.
Xian
03-31-2009, 11:31 AM
Hi Steve,

I'm in Jax also and haven't found anyone around here to use. I believe some of the local IT guys have used Stage 6 Motorsports for dyno tuning but I haven't personally worked with them.... http://www.stage6motorsports.com/

Christian
quadzjr
03-31-2009, 02:12 PM
I was not aware of what kind of computer you had. You could be tuning a motec if you wanted to. However in yoru case any dyno will do. here is a quick list of dynos in the florida region. You can look through it and find one close to you.

http://www.mustangdyne.com/LocatorPages/DynLoc_FL.htm
pitbull113
04-02-2009, 12:08 AM
Thanks for the help guys I'm headed to stage 6 on friday to check the place out.