ISC Front Section Exhaust - Any interest?

[mbuskuhl]

Last I spoke to Mike he didn't have any more front sections and didn't plan on making more. He did say if there was enough interest, he would do it.

Anyone interested in one? The front section is the part that bolts to the header and has the expansion chamber. They are $225 normally.

Supposedly they will bolt up to the other headers than the one Mike sells, I am told it will bolt up to any that have the RB style flange.

[mbuskuhl]

Alright, if no one wants one who wants to sell me theirs? :shrug:

[Scooter]

I think the reason people don't want to buy one of these is just because most people need to put a muffler in that spot in order to make sound requirements wherever they race.

I know that's what I'll be doing anyway.

[its66]

As far as making sound. I normally see 93-98 db with the complete ISC exhaust. I did show 100db one time.

Chris Wire, read this, get in on this. IIRC, Mike VS wants 5 or so to build at once so he can keep the cost down for everyone. You KNOW you need one also.

[Eagle7]

I think the reason people don't want to buy one of these is just because most people need to put a muffler in that spot in order to make sound requirements wherever they race.
I don't want one because I've already got one. Never had a sound problem with my full ISC exhaust - don't even use a turn-down.

[Chris Wire]

Mark,

I'd be interested if we can make it happen.

[mbuskuhl]

1. Mark Buskuhl
2. Chris Wire
3. drewski86 (rx7club.com)
4. N1XRR (rx7club.com)
5. __________

You guys who already have one really need a spare. Who's in?

[mbuskuhl]

The deal is on. Just spoke to Mike and you need to call and give him your CC number. He will take your info, when he has the 5 CC numbers he will have them built. He said he can have them done for us by mid December. Price is $225 + shipping.

Call Now! ISC/Mike - 863-324-4539

Said they would order....

1. Mark Buskuhl
2. Chris Wire
3. drewski86 (rx7club.com)
4. N1XRR (rx7club.com)
5. Hyper4mance2k (rx7club.com)


PAID!
1. Mark Buskuhl
2.
3.
4.
5.

If anyone else wants in it is not too late, just add your name after you call and give Mike your CC.

[EagleScout]

1. Mark Buskuhl
2. Chris Wire
3. drewski86 (rx7club.com)
4. N1XRR (rx7club.com)
5. Hyper4mance2k (rx7club.com)


PAID!
1. Mark Buskuhl
2. Ray Czech (EagleScout)
3.
4.
5.

If anyone else wants in it is not too late, just add your name after you call and give Mike your CC.[/quote]

[mbuskuhl]

Thanks Ray!

PAID!
1. Mark Buskuhl
2. Ray Czech (EagleScout)
3. drewski86 (rx7club.com)
4.
5.

[Chris Wire]

Man you guys are quick!

I just sent myself an email reminder to work so I'll try to remember to get on board tomorrow.

Thanks, Mark.

[Chris Wire]

PAID!
1. Mark Buskuhl
2. Ray Czech (EagleScout)
3. drewski86 (rx7club.com)
4. Chris Wire
5.

[mbuskuhl]

Thanks Chris!

Only one more needs to call Mike.

[NutDriverRighty]

Captain Who and I have an IT7 car and need a header. Since we have and ISC exhaust from the passenger footwell back, it would be nice to add an ISC header. Any chance of attaching this request to the ITS/13B request and having things work for all of us?

Scott Franklin
ITA/7
SPU #68 (stock)
SPU #64 (Hayabusa)
F&C
CCR BoD
SWC CCR Road Racing Liaison

[mbuskuhl]

Captain Who and I have an IT7 car and need a header. Since we have and ISC exhaust from the passenger footwell back, it would be nice to add an ISC header. Any chance of attaching this request to the ITS/13B request and having things work for all of us?


I'd contact Mike if I were you. I wanted a part, specifically the "front section" which Mike was out of stock on and he was not going to make more of since the demand was not there. So, I asked if I created demand would he make them in which he said sure, but he'd need 5 to make it worth his time.

I'm sure if you can create demand for this header you want, it could be done.

[mbuskuhl]

5 paid now. It's a go! Mike will be calling everyone to get shipping info when they are ready.

1. Mark Buskul
2. Ray Czech (EagleScout)
3. drewski86 (rx7club.com)
4. Chris Wire (TeamWireRacing)
5. Hyper4mance2k (rx7club.com)

[VinnyV81]

You guys are gonna love the way the car sounds with this exhaust setup!!! I'm actually considering putting a 3" turn down on my muffler just to make it a little quieter!!!

I'm really glad that Mike decided to step up to the plate and make a few more of these. I got the LAST one that he had, and he told me that he wasn't gonna make anymore...(very time consumeing-plus demand). When you get it, then you will understand where he is coming from.

-Vincent.