Transmission Tailshaft Mounts 2nd Gen?

[tdw6974]

:shrug:Hmmm. Went to shop to swap Tranny (just as a precaution) Lo & Behold the tailshaft mount is different on the one we where pulling out vrs the 2 spares we had to put in. The one in car has a Y bracket that bolts directly to the tailshaft, So I pull my trusty parts manual and diagram shows a different set with 2 rubber mounts on a wider Y bracket that appears to bolt to the bottom of tailshaft. Appears that the bottom mount to frame is the same. Of course I can't seem to find the different Y bracket in our parts stash(ok pile of stuff) also the extra Frame mount bushing is shot the one in car looks to be a rubber mount for a Aframe for better durabilty. Any helpful hints tips etc appreciated:eclipsee_steering:

[mbuskuhl]

The 2nd Gen trannys are interchangeable between S4 and S5, however you need the corresponding mount. The 86-88 S4 tranny mount is different than the 89-91 S5 tranny mount.

Here's a picture of the two different mounts on some parts trannys.

http://img143.imageshack.us/img143/225/pict0019md8.jpg
http://img260.imageshack.us/img260/8332/pict0017xj4.jpg

86-88 Mount
https://www.mazdamotorsports.com/wcsstore/B2BDirect/images/catalog/section/CF02241_1000.gif

89-91 mount
https://www.mazdamotorsports.com/wcsstore/B2BDirect/images/catalog/section/CF02141_1000.gif

Hope that helps.