PDA

View Full Version : 240Z Air dam



Parrish57
02-18-2008, 02:06 PM
Can anyone identify the maker or a source for this air dam? Thanks

wcmcarlos
02-18-2008, 02:34 PM
Not being a S-A, but the bottom half looks just like my Home Depot air dam that I made for my Neon.
Garden edgeing with alum. strip.
Carlos

jmark
02-18-2008, 02:47 PM
Looks like a standard MSA air dam with an extension riveted on.

Parrish57
02-18-2008, 05:31 PM
I couldn't find this air dam on MSA's website. Is this a piece that they sold in the past but is no longer available?

Ron Earp
02-18-2008, 06:00 PM
It looks strangely familiar to me. IT almost looks like they took the spolier type I have and cut away a lot of it and used it. http://www.gt40s.com/forum/attachment.php?attachmentid=24035&stc=1&d=1190931707

Almost like they cut the top part off all the way around, and most of the bottom part too.

Those sides on the red car look like the profile from mine on the side.

http://www.improvedtouring.com/forums/attachment.php?attachmentid=56&d=1203357956

pballance
02-18-2008, 06:13 PM
Like Ron said, it looks like a Xenon that has been cut. The brake ducts are in the right places and it looks like the the bottom edge was added.

If we are right it is a Urethane Xenon. They are all over the web and ebay.

Ron Earp
02-18-2008, 06:17 PM
I'll try and get better pictures of the spoiler underlip area where it really looks like the picture you have. Mine is hacked up with additional ducts but that profile looks like mine. I dropped the car at Rex's for rear main seal replacement while we look at Jeff's motor. We can't have but one car in at a time and I hate the tranny job on jack stands, gives me the willies thinking about getting crushed.

pballance
02-18-2008, 06:26 PM
Ya' know it may not be a Xenon. Mine is as I found the manufacturing logo on the center inside of the dam. BUT, the dam extends all the way up to replace the OEM valance entirely and leaves the turn signal are open. It looks like the one Steve is asking about still has the OEM valance pan.

Parrish57
02-18-2008, 08:42 PM
Definately not a Zenon... That's what I have on my car. The one in the picture attaches to the bottom of the stock vallance, like Paul said. Not a BRE either. The BRE extends forward. The search continues.....

jrvisual
02-20-2008, 12:20 PM
It almost looks like it has been flipped upside down, hacked on and then had the strip added.

Parrish57
03-01-2008, 08:32 PM
Come on guys... I know SOMEONE knows the source of this air dam! I snapped this photo at Firebird raceway in Phoenix in March of 06. The car is the 46 red Z car. Anybody?