1st Gen Radiator

[tom_sprecher]

Who makes this one? Mine's just like it, in the shop to see if a leak can be fixed and if not I would like to replace it with the same make as shown below.

[dickita15]

Hard to see much in that photo. I assume it is not the ISC one?

[tom_sprecher]

It may very well be as my 1st car was built by ISC and that's where the leaker came from. I would not image Mike would take the time to make radiators instead of buying from someone who does, but who knows?

The filler "neck" is the giveaway I think.

[dickita15]

I will check the neck on the isc one I have in the car tomorrow. I believe that they take a off the shelf one and convert it to a double flow by adding a baffle on the left side tank and moving one of the outlets so they are both on the right.

[ddewhurst]

The ISC radiator that I bought from Mike was a Howe modified per what Dick said. The top of my radiator did not have the alum strap (or is this radiator a top tank/bottom tank?) going from side tank to side tank it had an inverted alum "u" shape channel.

[tom_sprecher]

I'm pretty sure they are top and bottom tanked.

[dickita15]

You are right about the unique filler cap. The ISC one has the cap right in the top of the tank.

[tom_sprecher]

That looks like it has side tanks. Mine definitely has top and bottom tanks. It's at a radiator repair shop and hopefully they can fix it.