Quaife

[Campbell]

Hi, I am installing a quaife in my tranny, I have the old diff out and the bearings removed. Two quick questions: any special technique to drilling out the rivets holding the ring gear?, and, any advice on getting the bearings on the quaife? thanks

[Conover]

Use new bearings!!

While you are in there replace the pinion bearings too, they suck, always replace them.

Drilling, start small and work your way up. Don't be in a hurry, it takes a while.

[Lael Cleland]

Whan installing put the dif in the freezer, and the ring gear in the oven @ 200 for 20 min or untill golden brown...

[Campbell]

Does anyone know what the torque specs are for the hex bolts on the quaife? thanks

[Bildon]

Does anyone know what the torque specs are for the hex bolts on the quaife? thanks
[/b]

For factory fasteners, 52 ft/lbs. For ARP consult the docs with the bolts.

No need to heat the ring gear.

PS - Try a clutch diff. nex time. Quaifes still spin tires.....

[Campbell]

Bill, to clarify I am referring to the hex bolts that hold the back plate on to the diff housing, not the ring gear on to the back plate.. is this what you were addressing? thanks

[Sandro]

PS - Try a clutch diff. nex time. Quaifes still spin tires.....
[/b]

You've sold me on a clutch diff, when funds allow I will be ordering one :023:

[Campbell]

I heard back from Quaife, it is 27lbs. thanks