View Full Version : Fuel test port valve location
anthony1k
07-17-2007, 08:27 PM
We are building an S2 for ITR. Any suggestions where to hook up the fuel test port valve?
Thanks...Anthony
We are building an S2 for ITR. Any suggestions where to hook up the fuel test port valve?
Thanks...Anthony [/b]
www.fuelports.com (http://www.fuelports.com)
Paul will fix you up
anthony1k
07-17-2007, 11:41 PM
Paul will fix you up[/b]
I spoke with Paul last year. He was not terribly familiar with the 944 and, as I recall, I did not like his suggestion. I'm trying to find out what others have done.
Team SSR
07-18-2007, 07:20 AM
We drilled and tapped our 8v in the front of the fuel rail for the fuel port. There was a capped fitting there from the factory. I think on your 16v it may be on the side of the fuel rail(?). Bring a length of hose with you to the track that fits on the fuel port to keep from spilling any fuel while taking a sample.
timo944
07-18-2007, 08:49 PM
I replaced the fuel lines with Earls. Before the line gets to the fuel rail I used the fuel test port from Pegasus.
http://www.pegasusautoracing.com/productde....asp?RecId=3447 (http://www.pegasusautoracing.com/productdetails.asp?RecId=3447)
You also need the fittings recommended. It goes in very easily and takes no real-estate.
I also zip-tied a piece of 3/8" rubber hose to the roll cage so it can be whipped out and connected to this port. The tech guys loved that!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.