Drill &Tap Info requested

[RacerBill]

What size hole should I drill in order to tap for a M10 bolt?

No, 'Just big enough' is not a legitimate response!!!!!! :D

[Greg Amy]

http://www.newmantools.com/tapdrill.htm

...among others. Search for "metric tap drill". - GA

[13GT3]

complete SAE and metric drill and tap tables, and metric/decimal conversions can be found here

http://www3.telus.net/public/aschoepp/tapdrill.html

[RED DIAMOND]

Hi bill
The correct drill size for a 10mm bolt is drill letter "Q".
this is .3320 (between 21/64 & 11/32)
it works for 1.25 or 1.50 pitch (thread percent)
your 10mm bolt should measure .3937 to .3940

Hope this helps Tim

[RacerBill]

http://www.newmantools.com/tapdrill.htm

...among others. Search for "metric tap drill". - GA
[/b]

Thanks, Greg - great site! Another resource to add to the collection!

[RacerBill]

complete SAE and metric drill and tap tables, and metric/decimal conversions can be found here

http://www3.telus.net/public/aschoepp/tapdrill.html
[/b]

Wow, another great site! Thank goodness I have a computer to catalog all this stuff. Makes me appreciate the Einstein Theory of Knowledge - never memorize anything you can look up!




Hi bill
The correct drill size for a 10mm bolt is drill letter "Q".
this is .3320 (between 21/64 & 11/32)
it works for 1.25 or 1.50 pitch (thread percent)
your 10mm bolt should measure .3937 to .3940

Hope this helps Tim
[/b]

Tim: Thanks a bunch. You still working over at Mike's off Livingston?

[lateapex911]

Makes me appreciate the Einstein Theory of Knowledge - never memorize anything you can look up!
[/b]

As long as you can remember where to look it up....

[RacerBill]

As long as you can remember where to look it up....
[/b]


That's the secret!!!!

[RED DIAMOND]

[quote]
Wow, another great site! Thank goodness I have a computer to catalog all this stuff. Makes me appreciate the Einstein Theory of Knowledge - never memorize anything you can look up!
Tim: Thanks a bunch. You still working over at Mike's off Livingston?
Hi Bill ,
After 34 years of turning bolts , I retired two years ago.
I was immediately informed that mechanics don't retire,
"they just die under cars." Now near Cincy.
Tim

[keycom]

Old mechanics never die . . . they just smell that way! :D