PDA

View Full Version : 2nd Gen Brakes Effectivness



Doncan
03-21-2007, 05:57 PM
<_< I would like to know how far the stock braking system can be safely pushed in a 2nd Gen RX-7 before needing an upgrade. Which ones would be the typical steps into upgrading it ?? Right now I run with stock vented discs front and rear with Goodrige braided steel lines, Hawk Blue pads at the track and Motul 600 fluid.

tbtapper
03-22-2007, 07:32 AM
Well, if you&#39;re running IT as I assume you are since you&#39;re posting on this site you&#39;re finished. The "sport" four piston vented front/rear set up is it.

Add front cooling hose to a vented backing plate and thats it. Rules don&#39;t allow anything else.

I believe that the GII RX7 with this set up is probably as good a braking car as any. Our weight is fairly high but not as much as some.

Our tires really can&#39;t handle much more anyway.

Travers
ITS 19

joeracerx95
03-22-2007, 03:43 PM
The team I was with at the 2005 25hr ran basically the same set up. After 25hr the car was still stopping well and had about 25% of the pads and rotors still left. Yeah, I couldn&#39;t believe it either. BTW, that wasn&#39;t because we were going slow, we won E0 class. :happy204:

-chuck-