PDA

View Full Version : 4.9 gear/crx



m carter
11-30-2006, 06:55 PM
What are my choices and prices for a 4.9 gear for 90 CRX SI?
Thanks,
mike

Xian
12-02-2006, 02:13 PM
You may check with Blake Meredith... "bamfp" here or thru his website of roadracegear.com. I believe that he's selling FD's for the 88-91 chassis.

Christian

PS
Any particular reason you're looking for a 4.9 instead of a 4.7?

racer-025
12-21-2006, 01:02 PM
I run a Houseman 4.80. If I'd do it again, I would go with the 4.90. Approx. $1500.

Xian
12-21-2006, 08:53 PM
I run a Houseman 4.80. If I'd do it again, I would go with the 4.90. Approx. $1500.
[/b]
Depends on were you run... with a 4.7 I hit the rev limiter at Daytona. I'd be backpedaling most of the way around the banking with a 4.9.

racer-025
12-22-2006, 04:46 PM
Daytona??? You lucky dog. I usually run short tracks, thus the low gearing.

Xian
12-23-2006, 08:45 AM
Daytona??? You lucky dog. I usually run short tracks, thus the low gearing.
[/b]
:P j/k Daytona's pretty cool for the drafting and banking but the infield is a bit flat and lifeless. It's about an hour from home so it's tough to pass up but it's no my favorite track... I'd love to be closer to VIR or Road Atlanta!

Christian

iambhooper
12-26-2006, 07:46 PM
Mike,

I don't know if the gearing is the same, but check with Matt and see what he's running. I think he got a 4.9 for about $600. A fair price in my book.

Merry Xmas!
hoop

H5Civic
12-28-2006, 09:54 PM
Please visit one of my sponsors, PIC Performance - http://picperformance.com/store/scripts/news.asp, as they have the 4.9 final drive available for the CRX/Civic cable trannies for $540 plus shipping.

You won't be able to find any info about the final drives on their website as it is a new item they just recently added, but go to the contact section and shoot Al or Jim Hung an email and they'll be more than happy to take care of you.

Regards,

Sam

KIWI
01-05-2007, 07:00 PM
I can help you with our German made GEAR-X Honda Final Drive Ratios... 4.7 or 4.9
Also C/R Gears if required.
These are of a far better quality than SRR, ATS or any of the other Taiwan manufactured Honda Final drives
available, We've tried them all! Early '88-'91 Cable Clutch CRX/Civic available.
Very competitively priced as well at $510.00
Jeff (Kiwi) Owen

Special Projects Motor Sports
824 w. Southern Ave.
Orange CA 92865
714 998 1258

[email protected]

racer-025
02-01-2007, 01:17 PM
Do they have these for the 3rd gen Integra?

KIWI
02-02-2007, 04:18 PM
Do they have these for the 3rd gen Integra?
[/b]


Were working on it...
Depends what transmission you are using?

Kiwi
[email protected]