Need New Lower Control Arms

[tom_sprecher]

Besides being bent up, the LCA's on my car were slap wore out. Ball joints and sphericals. What's the best source for replacements?

TIA

[steve s]

call mike at iscracing.net

[it7rx739]

Tom Tom Tom
Call me if need help or Mike at ISC
770-720-2039

Mad hungarian
ARRC champ
PRO IT champ
SARRC for funn
it7?-ITA39

[crushed]

call ReSpeed for the spherical bushings, they are in Lawrenceville:

404-310-0835

http://www.mrcmfg.com/respeed/catalog/prod...products_id=156 (http://www.mrcmfg.com/respeed/catalog/product_info.php?products_id=156)

[Jim Susko]

I have a set of control arms with 3/4 inch spherical metal bushings that I used for many years that I could sell. They seem to have little to no wear on them. I only took off due to the fact I created some custom plastic ones I was going to produce. So far finding a way to produce them in limited production quantities is not economical, but if they hold up as well as my plastic trailing link bushings they should never wear out. So the old ones are for sale.

Jim Susko