89-91 CRX

[raffaelli]

I am shopping for a 89-91 CRX which I am going to convert to a track car. I know it is more money to build the car rather than buy one built, but I want to do it myself.


I am looking at a car that has the B18 engine in it. Does that exclude it from IT?

[Gregg]

Originally posted by raffaelli@Dec 25 2005, 04:36 PM
I am shopping for a 89-91 CRX which I am going to convert to a track car. I know it is more money to build the car rather than buy one built, but I want to do it myself.
I am looking at a car that has the B18 engine in it. Does that exclude it from IT?

69180

Yes, that will exclude your car...you are going to find that IT cars are classed as they come from the factory.

Before you buy & start building, I strongly suggest that you download and read the rules and car classifications.

The GCR (General Competition Rules)
http://www.scca.org/_FileLibrary/File/GCR2006.pdf

[Catch22]

There are two "dumbest" things a future racer can do...

1. Go racing.
2. Build a car and then try to find a class for it.

The rulebook is at scca.com. Read it 5 times before you buy or build anything. Not even a wheel or tire.

[Knestis]

http://www.it2.evaluand.com/recipe.php

K

[raffaelli]

Originally posted by Knestis@Dec 26 2005, 02:12 AM
http://www.it2.evaluand.com/recipe.php

K

69184



Thank you. That is pretty much how I am going to go about it.

[raffaelli]

Originally posted by Gregg@Dec 25 2005, 10:25 PM
Yes, that will exclude your car...you are going to find that IT cars are classed as they come from the factory.

Before you buy & start building, I strongly suggest that you download and read the rules and car classifications.

The GCR (General Competition Rules)
http://www.scca.org/_FileLibrary/File/GCR2006.pdf

69182


I have a copy of the rules. I saw the passage that the engine had to be available as an option when the car was new.

I have heard so many conflicting stories about which engines were 'options' at that time.

[raffaelli]

Originally posted by Catch22@Dec 26 2005, 01:06 AM
There are two "dumbest" things a future racer can do...

1. Go racing.
2. Build a car and then try to find a class for it.

The rulebook is at scca.com. Read it 5 times before you buy or build anything. Not even a wheel or tire.

69183



I certainly intend to do #1 :023:

As for #2, well, I am trying to avoid that. Finding a bone stock CRX has been a bit of a chore.

Thank you.

[Gregg]

Originally posted by raffaelli@Dec 26 2005, 12:12 PM
I have heard so many conflicting stories about which engines were 'options' at that time.

69210

Fair enough...

If it helps, I can assure you that no B-series motor was ever sold from the factory in the US in a CRX or Civic prior to 1992.

CRX Si: D16A6
CRX (DX): D15B2
CRX HF: D15B6

http://www.crxsi.com/specs.htm (Note that the "DOHC" and "VTEC" were never sold in the US)

The first two are ITA cars though hopefully the CRX (DX) will someday be moved to ITB where it belongs. The HF is currently classified as an ITB car though it probably belongs in ITC (or lower).

Good luck with your build. As someone who also built from the ground up I can assure you that it's a great learning experience. Would I have been far less broke w/ a comparable car if I had just bought instead of building? Absolutely.

[raffaelli]

Originally posted by Gregg@Dec 26 2005, 06:01 PM
Fair enough...

If it helps, I can assure you that no B-series motor was ever sold from the factory in the US in a CRX or Civic prior to 1992.

CRX Si: D16A6
CRX (DX): D15B2
CRX HF: D15B6

http://www.crxsi.com/specs.htm (Note that the "DOHC" and "VTEC" were never sold in the US)

The first two are ITA cars though hopefully the CRX (DX) will someday be moved to ITB where it belongs. The HF is currently classified as an ITB car though it probably belongs in ITC (or lower).

Good luck with your build. As someone who also built from the ground up I can assure you that it's a great learning experience. Would I have been far less broke w/ a comparable car if I had just bought instead of building? Absolutely.

69217


Thank you!

[Catch22]

The HF was moved to ITC last year.
If someone can figure out how to make power with that 8 valve... Watch out.

[Gregg]

Originally posted by Catch22@Dec 26 2005, 03:40 PM
The HF was moved to ITC last year.
If someone can figure out how to make power with that 8 valve... Watch out.

69219

If it was then we need to submit an O&A...It's listed in the '06 GCR under ITB (ITCS - 35).

[Catch22]

I'm pretty sure it was in a fastrack last year.

[Gregg]

Originally posted by Catch22@Dec 26 2005, 08:12 PM
I'm pretty sure it was in a fastrack last year.

69231

Nope. I just love how the latest version of Acrobat will do a text search against all PDF's in a folder for ya. Only CRX/IT-related stuff found was the 1st gen Si / Civic Si move to ITB and your rejected requests to move the EF CRX std. / Civic DX to ITB.

Looks like the snail is still a B car.

[raffaelli]

How does a 95 DX hatch stack up or a 91 DX? DX not have enough power?

[Gregg]

Originally posted by raffaelli@Dec 26 2005, 08:57 PM
How does a 95 DX hatch stack up or a 91 DX? DX not have enough power?

69234

Since they are still classed in ITA you will be at an extreme disadvantage. These throttle body-injected cars make about 15hp less than the Si's from the factory (at about the same weight) and there is precious little that you can do to get more out of them vs. other platforms (like the Si). They might make decent cars for ITB if they ever get classed there.

I wouldn't recommend building until they are out of ITA. As Catch22 will tell you, though, the Civic Std (same as the DX but with a 4-spd) make for a pretty decent ITC car.

[p99ro]

Hi Raffaelli
Welcome to ITA. ? Do you have racing expereince?
Your pick of an CRX is Great. I drive one now. Fast. But I bought a fast car somebody else built and spent monies on. If you ask anybody who has built a car you better have lots of knowledge beyond the book to get this done. It could cost as much as 15,000-25,000 said and done. So buying a as built is good thinking. Greg is well know for his thoughts. and a fast driver. Just food for thought but hey good luck. Buy lots of asprin. :bash_1_:
Scott NER CRXsi #07 NER

[raffaelli]

Hi Scott,

I have a few years of track day experience in my E46M3. I have worked on a few pit crews....that is it for actual race experience.......

The cost is not really a concern. I will pick at it till I am happy...then bring it to the track. I do not need to be on the podium tomorrow. As long as my family and I are having fun with it.....cost becomes second.

Thanks for the welcome!

[raffaelli]

Originally posted by Gregg@Dec 27 2005, 02:34 AM
Since they are still classed in ITA you will be at an extreme disadvantage. These throttle body-injected cars make about 15hp less than the Si's from the factory (at about the same weight) and there is precious little that you can do to get more out of them vs. other platforms (like the Si). They might make decent cars for ITB if they ever get classed there.

I wouldn't recommend building until they are out of ITA. As Catch22 will tell you, though, the Civic Std (same as the DX but with a 4-spd) make for a pretty decent ITC car.

69241



Thank you. That is kind of what I figured. Seems to me that there are more drivers at LRP (I am only 25 miles away) in ITA. So I would like to target that class.

[raffaelli]

Well the car is purchased.

I have been tooling it around town.

91 CRX Si, near bone stock. Some aftermaket arms, sportline springs, agx. Original engine.

Looking forward to building it.

[p99ro]

Hi Thats cool.
Good luck Good Luck/
Now that you have comited to it. You should see if there is anyone near you that would be willing to alow you to at least look at their car. I know that a guy named joe in Penn has a car for sale and has lots of picks. first thing is strip it. Now that you can add NASCAR bars on both sides rip out the door to rules. Remove all inside stuff. Get rid of the cad get a race header Hawk blue brake pads stock in rear works fine. Cheak all hubs and bearings for safty. don`t worry about a MSD. These cars run well close to stock. a rear sway bar. great cage, brakes diff/LSD. shocks. remove cad. new exhaust. gauges. shocks springs. fuel reg. comp for now is fine just the limitor. secure everthing. Fire Ex. find a mirrior that fits. I use a Stock car wide mirrior works great see everything in the blind spot to the back left. good seat is important. I use valvoline syn brake fluid.
Asump pump is needed. brack ducts. A fuel cell is an option for now wait. I`ve seen these cars rear ended at a 90 with no problem with the tank. Again good cage behind the driver. Contact Blanny for parts and help. Just remeber you don`t have to put the kitchen sink on it yet just get it going then add :018: . You will find lots of ways to speed more money. Be sides who said racing is cheap.
Hope this helps a little good luck and hope to see it in NHIS for the school. You do plan to race by april?
Scott CRXsi 89 #07 Yellow and purple stripes ITA NER :dead_horse:

[Tom Blaney]

Scott:

Come on it's Blaney, how many contingency checks have you received with Blaney spelled with two 'n's

Tom Blaney
SBMS Racing
raceshop.sbmsinc.com
[email protected]

[lateapex911]

C'mon, Blanney! Lighten up! ;)

What I want to know is, what the hell are those "Cads" he keeps talking about????

;)

hee hee....

[p99ro]

MAN.
This is what I get for Helping. Ball busting. So what 2 nn`s Wahhhh. Thats what I get for recomending you to someone.
Cad is for AKA "Catalytic" converter your wood pooping rx7 driving oil eating driving into every one oh thats right your just a magnet is why you have all those dents or canals or is it an RX7 should be put into ITB :P . Jake.
You guys need to get a hobby. :happy204:
Scott CRXsi 07 NER ITA

[Andy Bettencourt]

Boy, ITA in NER is gonna be fun!!!!!!!!

There are gonna be sooo many cars....

AB

[lateapex911]

MAN.
......
Cad is for AKA "Catalytic" converter...
[/b]
No, it's "cat"...CAT" ... "T"!!!!!
As in ,"You are allowed to remove the 'cat' in IT competition, Bob."
Now, "CAD" is an abreviation for a plating process..as in "Hey those cad plated parts look sharp, Bob..."


....your wood pooping rx7....
Scott CRXsi 07 NER ITA
[/b]

'Wood pooping'???????

What does one SAY to that???? I'm speechless...

;)

[p99ro]

Yea I know :wacko:
Cat is not a dog. I misspelled it. I missed that day in school. Go ahead and make fun of the visaul impared.
I was talking to Raymond and he said it was a normal mistake by people who have entered the ZONE and tryed to order a Cadilac Converter. Oh sorry about the wood thing. I was on a roll. You know wood dust.
Scott :D

[raffaelli]

Thank you for the input.

I think the first thing I want to do is just get it on the track. I will start with the cage.

Can someone recommend a cage builder? I am in Poughkeepsie, NY about 25 miles southwest of Limerock.

[p99ro]

Hi
I`m staying clear on this one. But ask BLANEY for someone he`s near by you.

http://www.sbmsinc.com/race_shop.html

Good Luck.
Scott CRXsi 89 #07 NER ITA :cavallo:

[Tom Blaney]

Thank you for the input.

I think the first thing I want to do is just get it on the track. I will start with the cage.

Can someone recommend a cage builder? I am in Poughkeepsie, NY about 25 miles southwest of Limerock.
[/b]


I strongly suggest that you contact Chris Howard he's in Rhode Island, and it is a bit of a ride,(508-429-6717) but he is very fair, very talented and very quick. I had him do the last cage on my CRX/Si. He did exactly what I wanted and the welding and fabrication work was very impressive.

Tell him you want the same cage as he did in my car, I duplicated it from the first CRX/Si I got from a guy in Michigan. That cage was designed by Nascar truck racers, and as Ray Lee Chee can attest, that cage saved my life at NHIS.

I live in Warwick NY, and use to work at IBM in Fishkill if you need performance parts or info on setting that car up let me know. I try to help all of my Civic/CRX racers as much as I can, since it is so nice to see them sitting in impound after kicking Acura, Mazda, and Nissan's butt......

[Andy Bettencourt]

I strongly suggest that you contact Chris Howard he's in Rhode Island, and it is a bit of a ride,(508-429-6717) but he is very fair, very talented and very quick. I had him do the last cage on my CRX/Si. He did exactly what I wanted and the welding and fabrication work was very impressive.

Tell him you want the same cage as he did in my car, I duplicated it from the first CRX/Si I got from a guy in Michigan. That cage was designed by Nascar truck racers, and as Ray Lee Chee can attest, that cage saved my life at NHIS.

I live in Warwick NY, and use to work at IBM in Fishkill if you need performance parts or info on setting that car up let me know. I try to help all of my Civic/CRX racers as much as I can, since it is so nice to see them sitting in impound after kicking Acura, Mazda, and Nissan's butt......


[/b]

He is actually in Holliston, MA. Phone number is correct. He does all of our cages as well.

101 Linden St
Holliston, MA

AB

[BAC]

I don't mean to hijack the thread but does anyone know of a good cagebuilder in San Diego County?

Thanks

~Brian