PDA

View Full Version : Sentra SER Chassis



andrew240z
08-22-2005, 08:59 AM
Is the Sentra SER ( 91) chassis any different from a SE Sentra? I have a chance to get a nice roller for cheap but it is an SE. Anyone know anything about these cars?

x-ring
08-22-2005, 09:16 AM
You might email Dave Muramoto in Colorado. He is pretty up on the details of the S13s and S14s.

I don&#39;t have his address handy, it&#39;s something like nissan3gt5<at>cs<dot>com. If you check the RMDiv divisonal report (&#39;Pony Express&#39;) in SportsCar, which he writes, I think he publishes his address at the bottom.

JayBay
08-22-2005, 10:24 AM
Check out sentra.net and sr20forum.com - they have plenty of info on both the 2.0 liter (SR20 engine SE-R) and the 1.6 liter (SE, XE, E) cars.

The chassis code for the &#39;91 - &#39;94 Sentras is B13. The chassis is the same, with some minor suspension tweaks for the SE-R. Bigger sway bars, a touch stiffer shocks and springs, I believe.

I have a &#39;92 XE that I started tracking this year. This winter I&#39;m probably going to prep it for ITB. Next year the 1.6 liter Sentras are moving from ITA to ITB, so they might have a shot at being competetive.

Racerlinn
08-22-2005, 11:38 AM
B13 - same chassis as long as it&#39;s not a 4-door.
SE-R&#39;s got the SR20, 5 speed, suspension bits, other odds and ends. Also a different rear fascia on the trunk with additional brake lights.
SR20forum.com is a good starting place. Stay in the Motorsports area to get real answers to questions. Much of the rest of the site is a lot of babble about bling-bling and stupid questions.

SWSpiers
08-26-2005, 07:35 PM
I&#39;ve got David Muramoto&#39;s e-mail as Nissan7gt5<at>cs.com. He&#39;;s a good guy and is always willing to lend a hand.