PDA

View Full Version : Work Table for your shop



Blix
02-22-2004, 03:08 PM
Sears seems to have knocked $50 bucks off their little workbench...I have one, and It's great for the corner of the shop...

http://www.sears.com/sr/javasr/product.do?...ical=TOOL&com.b (http://www.sears.com/sr/javasr/[email protected]@@@[email protected] @@@&BV_EngineID=ccfeadckkhgfmefcehgcemgdffmdfko.0&vertical=TOOL&pid=00959831000&vertical=TOOL&com.b) roadvision.session.new=Yes

OK...so that URL sucks, search for
59831
which is the part number

Eric

Quickshoe
02-22-2004, 06:09 PM
I have the same workbench in the nose of my trailer. I found it on sale just after Christmas for 79.99! My only complaint (in a trailer) is that the drawers aren't lockable. The top is 3/4"-ish high density particle board with a galvanizd sheet steel top cover. I just put an eyebolt on the underside and run a heavy bungee across the center of the drawer fronts. Storarge capacity is okay for the minimum required tools. The door side has 2 shelves adequate for storing boxes of lighter spares and hardware.

You have to assemble the thing yourself, no big deal, maybe 30 minutes.