PDA

View Full Version : Fords in ITC???



Soylent Green
11-04-2002, 06:51 PM
I was wondering how the early EGTs and Fiestas run in ITC. Does anyone have any info on these cars??? Im looking at running a lot of Nor Pac races and ITC is a pretty big class there. It seems to me that you can get one of these up and running pretty inexpensively as well. Thanks everyone!!!

Racescort
11-04-2002, 09:52 PM
Look for joeg on the forum. Im not positive, but I think he runs a somewhere between 82-84 Escort. I think thats ITC? He's very knowledgable either way, he can probably help you.

------------------
Doug
ITB Escort
[email protected]

Diane
11-04-2002, 10:16 PM
JoeG is in ITC as is Chris Johnson out here in New England. I don't think Chris is here on the board though.


Diane

joeg
11-05-2002, 09:38 AM
It's actually an 81 Lynx.

There are three real quick ITC "Escorts" in the NE--although two are hurting a bit from crashes. Lee Kaufman runs an EXP in ITC in the MARRS Series along with Dave Flinchbaugh in a 83-84 Escort. Both are very fast.

Also quick in his Escort in New England is Chris Johnson. He hurt it, however, at NHIS.

Jeff Leone is mighty quick in the NE with his Fiesta (there are a number of those all over the place. Lot's of potential with the largest displacement engine in the lightest spec car per the ITCS for ITC.)

Both cars suffer a bit from lack of support/popularity. You are sort of on your own with making and locating parts. However, Lee can fix you up with a Quaiffe. You have more wheel/tire options with the Escort than with the Fiesta and the Escort's brakes are a bit larger.

An ITC EXP holds the ITC track record at the Glen's Long Course.

Currently, both cars are old and OEM parts get tougher to find. I sort of just started collecting bits from my Pro Rally days and kept going.

They are both good cars and remember, you have a ITB and ITA option with the newer model Escorts.

Cheers.

Jiveslug
11-05-2002, 04:50 PM
Hey, just curious, has anyone ever seen an ITC Ford Cortina GT??? They are listed as legal, just wondering if someone has ever raced one.....

Jive

jericker
11-05-2002, 08:45 PM
Hey Jive,
Think I remember reading about one on the west coast about 7 or 8 years ago maybe. Don't remember any details or finishes though.
Jon

joeg
11-06-2002, 09:07 AM
Cortinas are neat, but it has got to be tough getting parts!Those cars are getting on to be 40 years old!

There is still the same problem of it having been a "Ford Orphan", meaning imported for a few year and then forgotten by Ford USA. It is a similar issue with the Fiesta, Festiva and Aspire.

Racescort
11-06-2002, 09:20 AM
Aren't the Cortina's mostly get raced in Vintage now?

------------------
Doug
ITB Escort
[email protected]

Jiveslug
11-06-2002, 08:42 PM
I think so Doug, but I believe they are mostly of the MKI variety. I could be wrong tho. I know that the old 2.5 series style cars have a really cool and popular racing series out here on the west coast. You guys should check out the B-Sedan webpage. Anyway, Since its been metioned, how is the cockpit space in a Fiesta?? I have a feeling Id be pretty cramped. hehe

Ryan, aka Jive

Russ Myers
11-06-2002, 10:56 PM
The Fiesta has oodles of head and leg room. It was designed to be big on the inside. And if you are serious about racing a Ford in ITC, let me know. I'll sell you mine.

Russ Myers
Fiesta #6

trueblue
11-14-2002, 10:35 PM
Originally posted by Russ Myers:
The Fiesta has oodles of head and leg room. It was designed to be big on the inside. And if you are serious about racing a Ford in ITC, let me know. I'll sell you mine.

Russ Myers
Fiesta #6

I have a Fiesta for ITC. The Rabbits are killer. I love my little car though.

Russ, I would be interested in your Fiesta. I like to punish myself I guess. Please contact me at [email protected]



------------------
TOO MUCH POWER IS JUST ENOUGH

Dick Elliott
12-26-2002, 08:53 PM
I beleave a 71/72 Pinto with a 1600 would fit into IT-C. Not listed but no big deal if your serious.

Joe Craven
12-27-2002, 12:37 AM
Interesting, I guess the 1971 1600 Capri would also fit nicely into the ITC camp. However, with the same motor, the Fiesta would be a tough act to follow.

fiestadude
12-30-2002, 11:07 AM
Russ,

Would you or anyone else have a knuckle joint for a Fiesta?

That may not be the correct term, but it is the u-joint that connects the 1/2 shaft to the P side of the tranny.

Let me know, there are just no spares around here in the MidWest.

Thanks,



------------------
JJ
#62 ITC

lrc
09-10-2003, 08:22 PM
I just stumbled across this page. So what if it's a year old.

I'm the nutcase that ran the '68 Cortina in ITC in '89-93 or there abouts.

http://www.red4est.com/lrc/racer_html/racecars.html

It met it's demise when an Rx7 spun in front of me 5 minutes before the end of the Illgen enduro and I zigged when I should have zagged. I sold the remains to Bill Knox, Mike Drouin had my spare body which I don't think Bill ever picked up. Bill died of cancer a few years back and I don't know whatever happened to the cage, motor etc.

I'm afraid that the car was hopelessly outclassed in ITC. I think it put 57 hp to the ground, though I might have gotten that up to 63 at one point, a lot less than the 510s.

Some stories of the car:
http://red4est.red4est.com/lrc/lday00/cortina.txt
http://red4est.red4est.com/lrc/foocarstories.txt

Harry
09-11-2003, 03:26 AM
The ITC Fiesta's in the Midwest have found some sort of loophole and are getting away with using Formula Ford heads. The original Fiesta heads were prone to cracking. One car owner said his Fiesta beat Rebstock at Hallett this year. The Formula Ford head info. came from a reliable source: Charlie Clark. Anyone wish to confirm the above?
Harry

grjones1
09-11-2003, 11:12 AM
Originally posted by Racescort:
Look for joeg on the forum. Im not positive, but I think he runs a somewhere between 82-84 Escort. I think thats ITC? He's very knowledgable either way, he can probably help you.


I race an ITC Fiesta usually at Summit Point and occasionally at VIR and we usually finish in the top 5 (1st at MARRS VI this year)when we finish. Craig Bucher also races a Fiesta and does quite well with a relatively stock version.
To get one to go fast you must take advantage of the full limits of the rules, otherwise the car will not be competitive. Greatest weakness are the front hubs and brakes, but there are ways to overcome the problems. call me at 540-972-1996 or email [email protected] and I will let you know all I know to be helpful.



------------------

grjones1
09-11-2003, 11:55 AM
Originally posted by Harry:
The ITC Fiesta's in the Midwest have found some sort of loophole and are getting away with using Formula Ford heads. The original Fiesta heads were prone to cracking. One car owner said his Fiesta beat Rebstock at Hallett this year. The Formula Ford head info. came from a reliable source: Charlie Clark. Anyone wish to confirm the above?
Harry
Harry,
The heads use the same valve and port sizes as those miserable "federal" heads, there just not prone to porosity cracks. No competitive advantage other than being able to finish a race without blowing a head gasket. And certainly no more of a "loophole" than the "G-grind" cam or games with gear ratios the VWs use that never in their lives appeared on a 1500-1600 production Rabbit. Just wanted to keep the record straight.
G. Robert Jones

grjones1
09-11-2003, 12:04 PM
Originally posted by fiestadude:
Russ,

Would you or anyone else have a knuckle joint for a Fiesta?

That may not be the correct term, but it is the u-joint that connects the 1/2 shaft to the P side of the tranny.

Let me know, there are just no spares around here in the MidWest.

Thanks,

I have a couple. You have to reinforce the rubber bushing to keep it from breaking. Falls under "shim" and "hardware" rule for legality.
G. Robert Jones

Harry
09-11-2003, 11:25 PM
Originally posted by grjones1:
[quote] [b] The heads use the same valve and port sizes as those miserable "federal" heads, there just not prone to porosity cracks. No competitive advantage other than being able to finish a race without blowing a head gasket.




Oh yea........you convinced me. Your absolutely sure theres's no differences in the original Fiesta head and the Formula Ford head sold by Ford other than the above mentioned cracks and there's absolutely no advantages due to port location. Their also all using 1.41 intake valves and 1.239 exhaust valves. We'll take a real close look later. One rule of racing is to know as much about your competitors car as your own car.
Harry



[This message has been edited by Harry (edited September 11, 2003).]

fiestadude
09-12-2003, 10:24 AM
Quote:

quote:Originally posted by grjones1:
[quote] [b] The heads use the same valve and port sizes as those miserable "federal" heads, there just not prone to porosity cracks. No competitive advantage other than being able to finish a race without blowing a head gasket.

Oh yea........you convinced me. Your absolutely sure theres's no differences in the original Fiesta head and the Formula Ford head sold by Ford other than the above mentioned cracks and there's absolutely no advantages due to port location. Their also all using 1.41 intake valves and 1.239 exhaust valves. We'll take a real close look later. One rule of racing is to know as much about your competitors car as your own car.
Harry

[This message has been edited by Harry (edited September 11, 2003).]
**********************************************

I am in the MWD and I also race an ITC Fiesta. I had my motor dome by Charlie Williams (THE 1600 Ford Guru). He does a ton of rebuilds for all the Formula Ford guys each year; literally dozens of engines. I had a FF head that I ran across years ago & I took it to Charlie when he began work on my motor. I did this for the reason grjones1 mentioned. I had a crack in mine.

I looked in the tech manual; specs are the same. I watched the MIC being put on the valves; EXACT SAME SIZE. If Charlie tells me that they are the same; I would be hard pressed to disagree with him. He could be wrong, I guess 30 years in the Ford 1600 building business may not be enough experience in these matters (NOT!!!!!!)

I ended up using another STOCK Fiesta head, BTW, and I know 95% of the Fiesta's who run in MWD, and none of them I have seen are using a FF head. Not that it would make a difference anyway.

I have been blessed with a very good season so far. I have won 9 of the 10 events I have entered, and pulled off several double P1 weekends.

I just think that there are not that many NON-FIESTA ITC cars that are running around here. You may see a 510 now and then, a few Fiats, but most of ITC are Fiestas in the MWD

Harry: Do you race in ITC? A Fiesta?

Just curious.



------------------
JJ
#62 ITC

grjones1
09-12-2003, 10:38 AM
Originally posted by Harry:



Oh yea........you convinced me. Your absolutely sure theres's no differences in the original Fiesta head and the Formula Ford head sold by Ford other than the above mentioned cracks and there's absolutely no advantages due to port location. Their also all using 1.41 intake valves and 1.239 exhaust valves. We'll take a real close look later. One rule of racing is to know as much about your competitors car as your own car.
Harry

[This message has been edited by Harry (edited September 11, 2003).]
Harry,
I didn't mean to upset you, but there are nuances that need be discussed. First, if the Formula Ford head uses bigger valves (and I don't think it does, I think you are confusing the FF head with the "big-valve" head BAT sells) then one can install new valve seats that will accept standard-sized valves. As far as port configuration, you'll have to compare the two, I don't have one to compare it to. Another point for anyone using the FF head is that if parts are no longer being manufactured (and I don't beleive Ford still manufactures the "federal head") then alternative parts are being allowed. I think that's how VW people get away with the G-grind. My car outruns much of the competition due to close attention to legal mods, taking advantage of the Fiesta power-to-weight (e.g., we have a chrome-moly cage),and legal suspension mods. If you want to go witch hunting, I suggest you tear down a few VW transmissions, I'm pretty sure they are using everything from diesel truck gearing to GTI gear boxes. By the way, I welcome protests. I love to see my competitors wasting money they could have spent making their own cars faster or using practice days to improve their driving.
Regards,
G. Robert Jones



------------------

fiestadude
09-13-2003, 08:26 AM
grjones1:

I couldn't agree more.



------------------
JJ
#62 ITC

Joe Craven
09-13-2003, 02:18 PM
Guys, I was looking through the ITCS and Cortinas and Fiestas weigh 1780 lbs with driver which is excellent. Given the weight, Cortina could be competitive.

How much power can you guys get from one of the Kent motors?

BTW, the 510s in the SFR are pretty fast in the straights and they handle good too.

grjones1
09-14-2003, 12:05 PM
Originally posted by Joe Craven:
Guys, I was looking through the ITCS and Cortinas and Fiestas weigh 1780 lbs with driver which is excellent. Given the weight, Cortina could be competitive.

How much power can you guys get from one of the Kent motors?

BTW, the 510s in the SFR are pretty fast in the straights and they handle good too.
Joe,
We have not dynoed, but I'm guessing with .40 over and proper machine work, the CR raised .5, a Weber 32/34 DMTR, really good header, balance and bluprinting, and proper timing, we're getting close to 100 HP with the Fiesta. The stock versions developed about 65 HP.
G. Robert Jones

------------------


[This message has been edited by grjones1 (edited September 14, 2003).]

Harry
09-16-2003, 11:31 PM
Yes I will race a itc car in the MiDiv.racing for Mid-Am points all next year. 2003-2004 Mid-Div Permanent number is 20.
JJ #62, It looked to me like you got passed under the yellow a few weeks back. Darn shame the race ended under yellow due to the car on the track at the top of the hill (turn 8). The guy in the Mazda screwed up a great race.
So.....Get your 20# flywheels back in and make sure all the little crap finds it way back on the car. The ff head flows much more air that the federal even with a smaller seat and valve. I've seen a Volvo DQed at the ARRC because he had slightly smaller valves which in his case produced more air flow.
Enough Said,
Harry

grjones1
09-17-2003, 09:49 AM
Originally posted by Harry:
Yes I will race a itc car in the MiDiv.racing for Mid-Am points all next year. 2003-2004 Mid-Div Permanent number is 20.
JJ #62, It looked to me like you got passed under the yellow a few weeks back. Darn shame the race ended under yellow due to the car on the track at the top of the hill (turn 8). The guy in the Mazda screwed up a great race.
So.....Get your 20# flywheels back in and make sure all the little crap finds it way back on the car. The ff head flows much more air that the federal even with a smaller seat and valve. I've seen a Volvo DQed at the ARRC because he had slightly smaller valves which in his case produced more air flow.
Enough Said,
Harry




You know Harry, in my 20 some years of racing experience, I've noticed that those people whose driving skill does not allow them to win on the track are the first to try to win in the tech shed.
If your knowledge of the Fiesta was complete, you would know that shaving the flywheel, in our case, just truing the surface, will eventually cause the clutch disc (stock configuration) to slip. so lightening the flywheel may have some limitations. And let's see now, reducing the valve size increases air flow but doesn't decrease mixture intake which would of course not affect power. I've heard it all now. Please come race against me I want to learn more.
I'm beginning to detect some unwarranted paranoia.
Good Luck,
G. Robert Jones

Addendum: If you look at F. in the ITCS it refers you to GCR 11.4 for measurement standards which states the "valve size is absolute maximum" which is +0.000 so if at the ARRC the Volvo was DQ'd for minimum measurement on the valves, he was screwed. That is to say replacement valves can be smaller but not larger. They are supposed to measure for within maximum, not for within minimum.


[This message has been edited by grjones1 (edited September 17, 2003).]

[This message has been edited by grjones1 (edited September 17, 2003).]

[This message has been edited by grjones1 (edited September 17, 2003).]

[This message has been edited by grjones1 (edited September 25, 2003).]

fiestadude
09-17-2003, 10:02 AM
Joe Craven:

The weight is awesome, but the lowest I have ever been able to get to is about 1925 with my big A#$ in the car. Cortina's would be a great car too, I just wonder about parts...

Harry:

I thought I got passed under yellow as well, but the corner workers did not think so, oh well, that's racing. I did not want to press it since I race with those guys in the #10 car every weekend, and they are good friends as well. DJ was not in the points so it did not hurt me in the champoinship run.

20# flywheels? I'm lost.



------------------
JJ
#62 ITC

grjones1
09-18-2003, 11:01 AM
Originally posted by fiestadude:
Joe Craven:

The weight is awesome, but the lowest I have ever been able to get to is about 1925 with my big A#$ in the car. Cortina's would be a great car too, I just wonder about parts...

Harry:

I thought I got passed under yellow as well, but the corner workers did not think so, oh well, that's racing. I did not want to press it since I race with those guys in the #10 car every weekend, and they are good friends as well. DJ was not in the points so it did not hurt me in the champoinship run.

20# flywheels? I'm lost.


JJ,
Email me at [email protected], and I can suggest how to lose another 100 pounds legally. (And we'll really drive Harry crazy.)
G. Robert

FiestaFrank
09-24-2003, 05:10 PM
Just a point of interest. The only head legal for the Fiesta has a casting number 771 (all federalized Fiesta parts start with 771). The only legal intake is also 771. You can "check" and "verify" similar parts all you want, the rules are the rules. 2 motors with the exact same bore and stroke are not interchangable!

grjones1
09-24-2003, 05:57 PM
Originally posted by FiestaFrank:
Just a point of interest. The only head legal for the Fiesta has a casting number 771 (all federalized Fiesta parts start with 771). The only legal intake is also 771. You can "check" and "verify" similar parts all you want, the rules are the rules. 2 motors with the exact same bore and stroke are not interchangable!

I assume Frank that from your pen name you drive a Fiesta, and I would ask: If the federal heads are out of production and all the used federal heads are cracked, do we then no longer race the Fiestas or do you have a solution for the cracked heads, which even after fixes will soon crack again?
I respectfully request a solution to this problem where the rules as you see them actually preclude racing a Fiesta in ITC. I would also add that nowhere in my ITCS does it say that parts must have a number stamped, only that parts that must remain as original must meet factory specifications. Otherwise most replacement parts (OEM-specified or not) would be illegal.

[This message has been edited by grjones1 (edited September 24, 2003).]

FiestaFrank
09-26-2003, 08:34 PM
Working in the auto industry affords some opportunity to check into the details a little deeper. Although you are correct about your point ("where does it require a certain casting?") I can tell you that only the 771 casting was ever imported into the US. There is no equivalent alternative. Many assume the non-federalized head with the same valve size fits the SCCA's expectation of legal but the lack of the passages for the air pump mean it is not a suitable replacement part under the rules (similar but definately not equivalent). I'll gladly wager my paycheck that a non-federal head will NOT pass teardown at the ARRC (I'll never wager against regional teardowns because I've seen all kinds of stuff squeek thru). With Fiestas you have to be very careful - XR2's were sold in Canada (not legal for SCCA racing) and with the multitude of FF and the like there are many non-legal heads around. When discussing this issue with friends at SCCA HQ (note! former autocrosser makes big time - actually some are real racers) the standard reeply is they never guarentee that you can race your car even if it's classified. So if replacement heads are unavailable then submit a request to have an alternate head approved (BAT has tried over and over). If there's no alternate head specifically allowed and you can't find a uncracked head, in SCCA's words "Tough". This is exactly whu I've horded a number of them.

FiestaFrank
09-26-2003, 08:39 PM
In no way do I mean to degrade the Fiestas in the previous post. Rather, I'd hate for somebody to go to the ARRC and have to deal with the embarrassment. I really think a well prepped Fiesta has a chance at a podium there, maybe one day I'll make it. Tracey Nine won twice in his Honda and I've run competitively with him before so I know its possible. Come on guys - who's going???

grjones1
09-26-2003, 09:40 PM
Originally posted by FiestaFrank:
Working in the auto industry affords some opportunity to check into the details a little deeper. Although you are correct about your point ("where does it require a certain casting?") I can tell you that only the 771 casting was ever imported into the US. There is no equivalent alternative. Many assume the non-federalized head with the same valve size fits the SCCA's expectation of legal but the lack of the passages for the air pump mean it is not a suitable replacement part under the rules (similar but definately not equivalent). I'll gladly wager my paycheck that a non-federal head will NOT pass teardown at the ARRC (I'll never wager against regional teardowns because I've seen all kinds of stuff squeek thru). With Fiestas you have to be very careful - XR2's were sold in Canada (not legal for SCCA racing) and with the multitude of FF and the like there are many non-legal heads around. When discussing this issue with friends at SCCA HQ (note! former autocrosser makes big time - actually some are real racers) the standard reeply is they never guarentee that you can race your car even if it's classified. So if replacement heads are unavailable then submit a request to have an alternate head approved (BAT has tried over and over). If there's no alternate head specifically allowed and you can't find a uncracked head, in SCCA's words "Tough". This is exactly whu I've horded a number of them.
Frank,
Thanks for your input, you sound well informed. Please allow me to dispute a few points. The injection passages can be drilled and as the rules allow, plugged. (Please don't ask if I've done mine.)The valves and ports are the same as the federal head. The only difference is the casting number and the fact that the casting material is superior but still cast iron. (I'm not a metalurgist.) And if the casting numbers are not required by the ITCS and the head meets all specifications then the head should be legal. And in fact, if the SCCA can allow VW to create a replacement cam for the Rabbits and have it accepted, no logic on this planet can refute the reasonableness of accepting the alternative head for the Fiesta. If they can't, I have a feeling they are going to create a few new candidates for NASA. [More steps are being taken to effect acceptance.] I would add that if the inspectors at the ARRC did in fact DQ that Volvo for small valves, they did so lacking accordance with the GCR that from my reading (and please tell me if I'm wrong and let's get the rule written correctly)says they are only supposed to check for maximum valve size (+0.00) and cannot measure for a valve being too small? So I'm not convinced the ARRC inspectors are any better or worse than those at any regional event.
Thanks for indulging me and I would appreciate further comment.

joeg
09-27-2003, 08:50 AM
I doubt even a genius tech inspector will know what to look for on that head--other than the obvious, like too much porting, etc.

Face it, these cars--while neat as hell--are ancient orphans. Unlike a Honda, you simply are not going to find many around--let alone on a race track--and most technical knowledge is in the hands of the owner-driver (and there are not likely to be many competitors driving the same car).

Use what you can to keep the car in competition.

grjones1
09-27-2003, 10:15 AM
Originally posted by joeg:
I doubt even a genius tech inspector will know what to look for on that head--other than the obvious, like too much porting, etc.

Face it, these cars--while neat as hell--are ancient orphans. Unlike a Honda, you simply are not going to find many around--let alone on a race track--and most technical knowledge is in the hands of the owner-driver (and there are not likely to be many competitors driving the same car).

Use what you can to keep the car in competition.

Joeg,
Yours is my kind of attitude.

grjones1
09-27-2003, 12:04 PM
Originally posted by FiestaFrank:
In no way do I mean to degrade the Fiestas in the previous post. Rather, I'd hate for somebody to go to the ARRC and have to deal with the embarrassment. I really think a well prepped Fiesta has a chance at a podium there, maybe one day I'll make it. Tracey Nine won twice in his Honda and I've run competitively with him before so I know its possible. Come on guys - who's going???

Frank,
It occured to me that perhaps you have connections with Ford, and you might have someone provide a replacement parts list that includes alternative heads (with air injection bosses for drilling)so this whole matter could be settled. SCCA does not have to approve anything. The rules state that if such a list is provided to National the parts may be used. Not true? I would also add that the heads were indeed imported to this country otherwise they wouldn't be here. Yes, for racing, and guess what, we're racing!




[This message has been edited by grjones1 (edited September 27, 2003).]

Fiesta#80ITC
09-28-2003, 09:09 AM
Frank I will be going to the ARRC this year with a Legal Motor I think the key to the Fiesta is in the suspension I have redone mine using all the same mounting points and this has made my car a winning car i make up all the time in the corners the engine is low on power but it is a very reliable engine I have had only 4 dnf's over the past 5 years and that was due to half shafts or hubs braking. as for the head and the intake I have a casting # of 771 on both of them. I think i should do very well at the ARRC this year I'm hoping for a top 5 finsh
Jeff Leone

joeg
09-29-2003, 07:33 AM
Go get'em Jeff!!

Ted_fiesta
11-07-2003, 02:44 PM
I recently bought a F production fiesta, it came with several spare heads. The FF head is OK in production class, so is it different, has anybody flow tested both heads? Anyhow the head on my car is FF, the spares are stock ford, I assume they are not cracked.
If the stock heads are prone to cracking then I don't consider the stock heads to be spares, does anybody want my spare heads? I think I have 3 or 4? Some complete some bare.
Perfer somebody come to the Philadelphia area and inspect/make offer. Otherwise they would have to be shipped. Either way if they are cracked you get your money back, but not the shipping. They are heavy to ship....
Also have a set of wheels that I don't really like, gold honey comb.
Anybody know where I can get more ATS wheels, they have 4 large holes, I think they were in some of the pictures in some of the BAT catalogs.

TED Heinritz