View Full Version : Bad wreck, need rear suspension parts for a 260z....
JeffYoung
04-24-2005, 11:56 PM
Bad wreck at Roebling (first lap of course) this weekend as an RX7 tried to win it all in the first turn. Jay Miller's 280z is toasted -- RIP No. 85. Jay is fine but he took a nasty hit.
My car, a silver 260z, got nailed right on the left rear wheel. Sheared the lower control arm in half, and tore up the hub. Bent the Chapman strut in about a 40 degree angle.
A quick inventory this evenig shows I need:
a. Rear control arm (think we might have a spare);
b. Rear Carrera strut;
c. Rear hub.
Half shaft looks ok. ANything I'm missig? best place to source this stuff?
Ron Earp
04-25-2005, 07:03 AM
We're trying to get this thing back in shape for VIR in 10 days - if you've got anything that is a match you can sell please let us know, we'd love to get her back on the track.
It is a shame about the race - one rather non-disciplined driver basically destroyed three cars and damaged two more; his own RX7, totalled Jay's 280z, probably destroyed another parties' RX7, moderately damaged a 190E, and did substantial damage to the 260z.
I hope none of us see anymore of that this year.
------------------
Ron Earp
NC Region
Ford Lightning
RF GT40 Replica
Jensen-Healey ITS
1/2 a 260Z ITS
greg hennigan
04-25-2005, 07:11 AM
i have a control arm adn hub if you need. please e-mail me for details. Thanks Greg
greg hennigan
04-25-2005, 07:13 AM
Sorry , Parts are off a 72' 240 z
JeffYoung
04-25-2005, 08:13 AM
Greg, you have mail. I think the suspension pieces are the same.
JeffYoung
04-25-2005, 08:15 AM
Actually, Greg, need your e-mail address....
x-ring
04-25-2005, 08:33 AM
We have to know the build date of your 260, Jeff/Ron. The early 260 matched the 240 and the late 260 matched the 280.
I *think* the changeover date was 8/74. You can tell by the bumpers if they haven't been swapped. The late cars have big, ugly bumpers, the early ones looked more like 240 bumpers.
Let us know, If I don't have the parts you need, someone here does.
------------------
Ty Till
#16 ITS
Rocky Mountain Division
greg hennigan
04-25-2005, 05:57 PM
wburstein
04-25-2005, 09:30 PM
Make sure you check the rear suspension parts on the other side of the car, especially if you are running a rear sway bar. I had to replace many of the parts on the "other" side after a hit on my rear axle.
Hope to see you at VIR. We will be in the red #10 240Z in ITS.
Take care.......Wayne
------------------
Wayne Burstein
WDC Region, ITS #10, Datsun 240Z
www.mountainmotorsports.net
JeffYoung
04-25-2005, 09:42 PM
Thanks guys. I think we found everything we need locally here with the help of Rex Deffenbaugh, local Z racer.
Greg, I'll contact you if we are short anything -- really appreciate the offer.
Ty, it is an early 260z. We checked the VIN number and it is lower than the 8/74 models.
Wayne, we'll see you at VIR it looks like. I'll be in a green TR8; Ron's got the Z that weekend. A bit battered but running.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.