PDA

View Full Version : Light weight wheels for 240sx offset



Machines240
11-19-2004, 12:36 AM
Basically what the topic says. im in search for some light wheels in 4x114.3 with good offset for the 240. around +20 in front and +15 in the rear i think sounds good. thanks!

Joe Harlan
11-19-2004, 01:41 AM
kosei K1's are nice....I amy be doing a Panasport deal in the near future again.

Enkie RPF1's are great. I don't know of many that will have those offsets?

Geo
11-19-2004, 02:24 AM
Aren't Volks available in the proper size?


------------------
George Roffe
Houston, TX
84 944 ITS car under construction
92 ITS Sentra SE-R occasionally borrowed
http://www.nissport.com

Machines240
11-19-2004, 11:03 PM
yea volks are a definite possibility but i was looking for alternatives from paying $300+ per wheel.
Id love to get the enkei rp-f1's but as far as i know, they dont come in 4x114.3 unless you know otherwise...

its66
11-20-2004, 12:28 AM
You might try Team Dynamics. Before I sold my 240, I did and they were going to send some 15x7's with a dual drilled pattern. I think the offset was 23 mm. I was trying to get away from running the spacers on them. I think the guys name I talked to was Don Kane. I won't swear to the name though.

The 15 inch choices for these with the correct offset are pretty scarce.

Jim

Machines240
11-20-2004, 12:40 AM
Yea, it is definately scarce being its the not-so-popular 4x114.3 pattern in 15" and 16". so it either comes down to volks with good offsets or the enkei rp-f1 (which i just found in my pattern by special order) in 16x7 in +25 offset, which im not so hot about, but we'll see.

turboICE
12-16-2004, 08:28 PM
You mean like this?

http://chargedperformance.com/images/ita240sx/k1hoosier2.jpg

Don't think I will need spacers anymore.

http://chargedperformance.com/images/ita240sx/ssrhoosierold1.jpg

I can't wait till February and get out to VIR.

http://chargedperformance.com/images/ita240sx/k1hoosier1.jpg

Machines240
01-11-2005, 05:38 PM
nice wheels. what is the offset of them?
and the weight?

turboICE
01-24-2005, 12:01 PM
Offset is 17mm and they weigh in at about 13~14 lbs.

Ed.
http://www.chargedperformance.com
http://www.wastedtalent.net

[This message has been edited by turboICE (edited January 24, 2005).]

SpudZ
01-31-2005, 01:25 AM
Turboice,
Did tire rack charge you an extra $30 for drilling on those ?? If so how much were they ?
I was just about to order some for my Z car ,
and then they mentiioned the extra shipping and the $30 a wheel .

Mike

turboICE
01-31-2005, 11:57 AM
They were not drilled for the sx. I will need to check records on the cost email me at ed[at]chargedperformance[dot]com.

[This message has been edited by turboICE (edited January 31, 2005).]

turboICE
02-09-2005, 01:04 PM
Looks like they have the proper 4X114.3 bolt pattern only on occasion. Currently they have blanks only that must be drilled to your bolt pattern. Price I am hearing is $180 drilled before shipping. Looks like my timing was lucky.