PDA

View Full Version : Earl-radiators



handfulz28
08-19-2003, 09:19 AM
I bought one from Ron Davis, very good looking piece. It's not going in quite as easy as I'd hoped, because the cap is on the driver's side right where the hood prop rests.
With all the "adjustments" from their stock radiator, the price was only a little bit cheaper than the Koyo. From what I've heard of the Koyo, I'd have to recommend it since it is 100% drop-in. I might even order one myself so I can quit fussing with the other one.
Michael

Tristan Smith
08-19-2003, 09:55 AM
Take a hammer and bang the inside hood bracing till the hood closes. It's the BFH fix. Worked on mine without any problems.

------------------
Tristan Smith
Buffalo's Southwest Cafe
ITA Nissan 240sx #56

racer14itc
08-19-2003, 11:06 AM
And where in the ITCS does it say you can do this???

http://Forums.ImprovedTouring.com/it/tongue.gif

Mark

[This message has been edited by racer14itc (edited August 19, 2003).]

Tristan Smith
08-19-2003, 11:23 AM
Rule 19, paragragh 6.5 .......

------------------
Tristan Smith
Buffalo's Southwest Cafe
ITA Nissan 240sx #56

erlrich
08-19-2003, 02:46 PM
Thanks Michael - I'm leaning toward the Koyo even more now, as I've really begun to appreciate the difference between "drop-in" and "make-it-fit" http://Forums.ImprovedTouring.com/it/biggrin.gif With its big (2"+) core I can't imagine the Koyo gives up much to the double row units, especially if used in conjunction with an oil cooler. And besides, I'm way up here in VA, where it never gets that hot in the summer http://Forums.ImprovedTouring.com/it/wink.gif



------------------
Earl
ITA 240SX in process

racer14itc
08-19-2003, 03:11 PM
Originally posted by Tristan Smith:
Rule 19, paragragh 6.5 .......



I can't find "rule 19". What section in the ITCS are you referring to? Section 3 covers engine cooling system and radiators.

MC