View Full Version : Tech question

03-25-2005, 10:30 PM
I'm in the final stages of getting my car ready for 4/2 annual tech at Shine. As this is my first car, I need some help on location for the fuel sampling port and if there is a specific location for the transponder.



chuck baader
03-26-2005, 09:14 AM
I put my transponder in the hole left by the air conditioning dryer...bent a piece os metal and attached the t'ponder about a foot off the groung...good point as there is no metal under it.

Sample port is a high pressure hose "T" off the return line and ty-wraped in position along the left front fender. Mine will extend past the fender a good foot when loosened. Don't want to be sampling gas in a hot engine compartment. Chuck

Chuck Baader
#36 ITA E30 BMW
Alabama Region Divisional Registrar

03-26-2005, 07:56 PM
Go to fuelports.com, Paul makes his own fuel ports and makes a hose that attaches to the fitting to sample the fuel outside the car.


Andy Bettencourt
03-26-2005, 08:36 PM
I have an extra high-end Test port set up if you are interested...

andybettencourt AT hotmail DOT com


Andy Bettencourt
New England Region, R188967
www.flatout-motorsports.com (http://www.flatout-motorsports.com)