PDA

View Full Version : Anyone Need Restrictor Plates?



95M3Racer
01-03-2005, 02:16 AM
I was going thorugh and organizing some boxes of Spares, and found a stack of Restrictor Plates. They are from an M50 2.5L I6.

There are 6 Plates in total, Sizes include:

2-1/4
2-9/32
2-5/16
2-11/3
2-3/8
2-3/16*

*Note this is a thicker aluminum plate, as the others are all the same thickness (small, about half the thickness of the aluminum plate).

These are the measurements I took, and I'm pretty sure they were made to Metric, so they'll have to be measured with a metric Caliper (i only have standard here).

If anyone wants the entire set, let me know, and we'll work out a deal.

Thanks!