PDA

View Full Version : Final set ups



Solo318
03-10-2003, 06:08 PM
Does anyone run a E-30 318i in ITB? I'm converting my autocross car into ITB and I have my front coilovers at 450 lb each and the rears at 375 lb. Is this enought front spring for road racing? I also have the 325 is sway bars front and rear, are these large enough. any set up help would be appreciated. Also does anyone know someone in central florida that would weld a rear diff? I'm a decent welder but I think its out of my league. TIA http://Forums.ImprovedTouring.com/it/biggrin.gif http://Forums.ImprovedTouring.com/it/biggrin.gif

------------------
SCCA 289557
ITB 318i

chuck baader
03-10-2003, 10:38 PM
e-mail me [email protected]

------------------
Chuck Baader
SEDIV ITS #36 E30 BMW
Alabama Region Assistant Race Chair, Registrar

Bruce Shafer
03-11-2003, 06:45 PM
Your setups don't sound too far of from what I would use on a 318i in ITB, at least to start. My opinion is based on the fact that I ran an E30 325is in ITS for several years and am currently a frustrated E36 ITS owner.