Good Starting Setting for Camber, Toe-in etc.

[Terry222TT]

Hey guys, I'm putting the finishing touches on a ITS RX-7. I need some suggested settings to get started. Once I get those I can take it from there.
Thanks for the Advice, Terry

[Eagle7]

I'm no expert, but I'll start. It certainly depends on your suspension components and tires, which you might want to post.

I've got 500/375 springs, a Suspension Techniques front bar set on soft, no rear bar, and run Hoosier R3S04.
Front - 3 deg camber, 0 toe on fast tracks, 1/16" toe out on twisty tracks.
Rear - 2.1 deg camber (can't get any more without changing the exhaust - but it seems OK), 1/8" toe in. I usually put 2 PSI extra in the rear tires to loosen it up a little.

------------------
Marty Doane
ITS RX-7 #13
CenDiv WMR

[Terry222TT]

Marty,
Thanks for the answer. That's what I'm looking for. I'm waiting on a set of Zeals and will be running Toyo RA1s. I'll have to check on the spring rates.
thanks, Terry