rubber boots on RX-7 1985 front brakes

[reisertracing]

I have been working on my IT-7 85 RX-7 and found the front caliper bolt boot missing on the left side. I ordered the boot from Mazda and it came with a boot and also a ,looks like, a bushing type part. What is the proper way to assemble this in the caliper?
I don't want to screw up and wonder if you guys can help out.

------------------
Johhny R.

[ddewhurst]

Johhny, I never repaired the deal your talking about. My front rotors are laying loose dangling by the braided lines siting on a block. It looks like the deal for the upper caliper pin is a rubber shield that keeps the dirt/shit off the upper pin. The lower deal looks like it's rubber all the way through the caliper. Like the lower pin slides in a rubber sleeve.

Take a look at your other side if all the parts are on that other side.

Best I can do. http://ITForum.ImprovedTouring.com/wink.gif
David

[Speed Raycer]

Don't worry about the boot... it'll end up getting torn up anyway with the number of times the calipers go off and on with us racers.

Make sure that you use a little lube on the shaft of the bolt.

------------------
Scott Rhea
It's not what you build...
it's how you build it
http://www.izzyscustomcages.com/images/IzysLgoSm.jpg (http://www.izzyscustomcages.com)
Izzy's Custom Cages (http://www.izzyscustomcages.com)