PDA

View Full Version : Victoria British Rebuild Kits



dyoungre
09-11-2003, 12:27 PM
Anyone ever rebuild a 12A with the gasket/seal kits from Victoria British? Prices look to good to be true...

[This message has been edited by dyoungre (edited September 11, 2003).]

BrianB
09-13-2003, 11:52 PM
Hepolite apex seals? I've got more than a few Victoria British parts on my TR-4,prices are good especially at the jobber rate. I would never imagine that VB would sell rotary parts. I'm curious, what are their prices for gasket sets and seals for a 86-91 13B? How many sources could there be?
Brit bits on a Mazda?
B

lateapex911
09-14-2003, 03:07 PM
Seems like replacing your homes asphalt shingle roof with cardboard box sides!


I can't imagine there being a price difference that could be significant enough to offset the time spent and the risk.

------------------
Jake Gulick
CarriageHouse Motorsports
ITA 57 RX-7
New England Region
[email protected]

Speed Raycer
09-14-2003, 05:40 PM
I just received their catalog in the mail yesterday. A gasket kit for a 84-85 12a is $120. Thats just the gaskets, all the o-rings. Everything rubber or soft, but not a rebuild kit... no apex seals. In fact, I cant find anything to do with the rotors in the catalog.

------------------
Scott
It's not what you build...
it's how you build it

<A HREF="http://www.izzyscustomcages.com" TARGET=_blank>
www.izzyscustomcages.com (http://www.izzyscustomcages.com) </A>

[This message has been edited by Speed Raycer (edited April 20, 2004).]

BrianB
09-14-2003, 06:25 PM
Mazdatrix sells the gasket set for $111.
b

steve s
09-15-2003, 08:37 PM
mazdaspeed sell a 12a gasket set for $78.00 pt.# n231-89-100

------------------
steve saney
it-7 /it-a #34

dyoungre
09-19-2003, 12:57 PM
Thanks, all, for your help. I thought a rebuild kit was on the order of $600, and freaked when I saw the price. Gaskets and seals should be it, right?

My first rotary rebuild....But at least I do have Hylomar, ready and waiting!

------------------
Dave Youngren
NER ITA RX7 #61

ishod
04-19-2004, 11:23 PM
Dave,

Are you still out there? I'm searching this forum for info about rebuilding a 12A. Today I signed-up for Mazda Motor Sports but they indicate it could be a week or two before approval, before I can purchase parts. How did your rebuild go? Any suggestions that you might share? I'm awaiting receipt of a 2 1/8" socket to get the flywheel removed. Don't know how bad it is inside yet but assume that I need a complete set of gaskets, seals, and maybe new rotor housings (ouch!). What can I do to get thru this as fast as possible as the season is passing me by.

Thanks in advance for any input you care to share.

Scott Goble
Ozark Mountain Region SCCA
IT& #33
(417) 848-7584

Speed Raycer
04-20-2004, 12:17 PM
Scott... was sorry to hear that your motor went south at Gateway. I wanted to shoot the bull with you, but was having starter problems on Saturday, then carb problems, then you were gone Sunday.

On the 2 1/8 socket, just go to a farm supply store ... they should have plenty of them, and probably much cheaper than actual tool stores.

If you haven't already, I'd call the guys at Motorsports and talk to them. I'd bet they'd get you setup w/o the 2 week delay.

------------------
Scott Rhea
It's not what you build...
it's how you build it
http://www.angelfire.com/mo3/rudder_racing/images/RX7_Pictures/SRsRX/sig58.jpg (http://www.izzyscustomcages.com) http://www.angelfire.com/mo3/rudder_racing/images/IzzysImgs/IzzysLogoDSsmall.jpg www.izzyscustomcages.com (http://www.izzyscustomcages.com)