Ignition Coils 1st Gen ITA

[tdw6974]

Any suggestions as to what Brand of Ignition coils to use? The coils on car now "Blue". I haven't pulled then yet as I would rather have replacements in hand. Thanks Tom weaver ITA # 63

[steve s]

i use the original coils have no problems with them. also the MSD blaster coils that fits in the original holder work just as good.

------------------
steve saney
it-7 /it-a #34

[Crack Monkey]

I use the MSD Blasters. I was told to use the off-road version, but I forget the reason.

[titanium]

The MSD coil recommend for sideways mounting is the "vibration resiatant" coil. This coil is epoxy filled, rather than oil filled, as the conventional "blaster" coil is.
When a oil filled coil designed for vertical mounting is mounted on it's side, it is theoretically possible for the coil to overheat and fail.
Did I forget to mention this in my "ignition" post I wrote several months ago?
Oh well, do a search under my username if you want to read it.
*******************************************
Rodney Williamson
#93 IT7
Titanium Motorsports temporally move to:
http://bellsouthpwp.net/t/a/tamrod93/