CRX Trailing Arm bushings

[racer-025]

Just acquired a set of Noltec trailing arm pivots. They look like very high quality. Has anyone used them? What are others out there?

here is the pic.
http://www.geocities.com/mcnuttracing/trailingarm.jpg

[Tom Blaney]

If you are looking for a better way, look at my rear inner and outer offset bushings, they are strong, light, and based on how you position them, you can get up to a maximum of 3-4 degrees of negitive camber. The ability to tune rear camber and to adjust it your driving style makes a big difference in how confident in the car and the lap times will reflect it.

Here's a link to the picture and a link to my website

Tom Blaney

http://www.sbmsinc.com/photos/inner_bushing_0.JPG
http://www.sbmsinc.com/race_shop.html

[racer-025]

those are interesting. I'm assuming IT legal of course. What are you using for the trailing arm pivot?

[Tom Blaney]

Originally posted by racer-025:
those are interesting. I'm assuming IT legal of course. What are you using for the trailing arm pivot?

The lower pivots are the nylon/delron pieces from somebody like suspension tech. etc. You want the lower arm to be solid but centered.

Yes they are legal. Send me an e and we can discuss the install and more details.

Tom Blaney
[email protected]