PDA

View Full Version : Miata wheels? 14x6



Tyson
04-18-2002, 03:41 PM
Hey, with a 45mm offset, will the OEM Miata wheels which are 14x6 work on a CRX right? I know theyre 4x100 too. The advantage would be, depending on year, theyre really lightweight at 10-12lbs and with so many spec miatas out there, theres gotta be some affordable sets laying around.

Mike Dunn
04-18-2002, 10:14 PM
Yes, they should fit. I have some(hint,hint).

Just make sure that they clear the brake calipers when they are torqued.

--Mike

Chris Sawatsky
04-19-2002, 01:19 AM
I've heard you have to machine the center hole to be larger... But I can't say for sure

Tyson, ask on crx.h-p, it comes up there every once in a while, someone will know

tderonne
04-19-2002, 09:34 AM
The 8 stock Miata wheels laying by the Spec Miata I'm working on are 14x5.5 not sure if there were other wheels that were 6" wide, but these are 5.5".


Originally posted by Tyson:
Hey, with a 45mm offset, will the OEM Miata wheels which are 14x6 work on a CRX right? I know theyre 4x100 too. The advantage would be, depending on year, theyre really lightweight at 10-12lbs and with so many spec miatas out there, theres gotta be some affordable sets laying around.

Richy Gonzalez
04-20-2002, 01:37 AM
I have a set of the steal wheels, the ones with hubcaps, and the centers are too small. However, I don't know if the aluminum one's have the same problem or not.

------------------
Richy Gonzalez
ITA 89 CRX (http://communities.msn.com/TheGonzalezFamilyRichySheilaandNyah/projectitacrx.msnw) - 2002 Season

fastist12
04-20-2002, 06:18 PM
I just obtained those same wheels
Everything is correct but you have to machine the centre out to clear the stub axle spigot
WC