View Full Version : a-1 alignment
mike_a-1gti
11-19-2002, 09:46 PM
Anybody out there have any suggestions for front-end alignment on a-1 GTI running Hoosier R3s03. Please ,any good info to start with will help.:
------------------
Mike M.
Bill Miller
11-19-2002, 10:51 PM
I run 1.5 deg. of neg. camber and 1/16th toe out. I run the same rear camber and 1/16th toe in.
------------------
MARRS #25 ITB Rabbit GTI
SCCA 279608
Scirocco#28
11-20-2002, 01:06 AM
Hehe, ok I'll add my setup because its a little different, on the front anyway. I run 3.25 neg on the LF and 2.25 neg on the RF. I run zero toe. The car wants to track a lot I find on straights with my locked diff if I run toe out. On the back I have 2.5 neg on LR and 1.75 on the RR, with a 16th in as well.
------------------
87 ITB Scirocco
HighSpeed Motorsports (http://www.geocities.com/highspeedconnectionracing)
GTI Cup
11-26-2002, 12:47 PM
3 degrees neg camber with 1/16th toe out in front, 1.5 neg camber and 0 toe in the rear.
------------------
Glenn
MARRS ITB #07 (http://www.geocities.com/gt1vr6/veedubs.html)
Bill Miller
11-26-2002, 07:14 PM
Glenn,
Please email me,
[email protected]
------------------
MARRS #25 ITB Rabbit GTI
SCCA 279608
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.