PDA

View Full Version : mounting Sparco and Cobra seat



BoxOnWheels
08-13-2002, 10:20 PM
I just got a Sparco seat with the steel sidemounts for the driver's side and a Cobra Clubsprint (no seat brackets right now) for the passenger side. Is there any way to retain stock mounting or seat bases for the Sparco/Cobra? If possible, I'd like to retain the ability to slide seat back n forth.

The seats will be going into my rabbit

Any info on mounting it properly would be helpful. TIA

Bill Miller
08-13-2002, 11:29 PM
You can take the seat base from a stock VW seat and modify it so that the other seat will fit. Requires welding some brackets.

------------------
MARRS #25 ITB Rabbit GTI
SCCA 279608

joeg
08-14-2002, 07:40 AM
I trust the Rabbit is not an IT car; you cannot swap the stock passenger seat for an aftermarket one in IT. Either the stock passenger seat stays or is removed. Sorry, no substitutes.

BoxOnWheels
08-14-2002, 12:49 PM
No, it's not an IT car. The rabbit is being setup so I can play at some track and autocross events.

dave parker
08-15-2002, 03:39 PM
"Box"
I sell at my store a bracket that allows you to mount any bottom mount or side mount seat and still retain the "slide" or adjustablity. Email me off line at [email protected]
dave parker
wdcr itb#13