PDA

View Full Version : VW Golf Electrical/Gauge Question



jnathan
06-26-2002, 01:42 PM
I have an '86 Golf GTI which I have just started racing in ITB. I have removed the instrument cluster and replaced it with a bigger tach and some gauges and I have two questions:

1) Does anyone know the resistance values of the fuel sending unit and which VDO Fuel Gauge will work? Using stock tank/sending unit.

2) Does anyone know the temperature range of the stock oil temperature sender? I had one of the digital readouts in the instrument cluster and don't know the range.

Thank you.

Jason

rmicroys
06-28-2002, 12:08 PM
2) Does anyone know the temperature range of the stock oil temperature sender? I had one of the digital readouts in the instrument cluster and don't know the range.

I would suspect that the oil temperature sender is the equivalent of a VDO oil temp sender, VDO PN: 323 057. I would say that it can likely accurately measure from 50deg C to 300deg C. Not sure on the sender's linearity or resistance curve though - as is with most of these temp senders, they are NOT linear with temperature very likely logarithmic.