PDA

View Full Version : initial car setup



four27
03-01-2002, 11:43 PM
I have my 94 Acura Gsr already for first ITS race. I have Koni yellows with Eibach 700 in front and 900 in back with ground control 25mm rear swaybar and stock one in front. Car feels good driving around neighborhood but if I swerv it really fast going say 30mph the rear tire on the inside comes off the pavement. If I slow the swerv down but still aggressive it is ok. Seems most cars would probably do this. Any comments on this? Any advice on how to set different factors for initial run?

CrunchyFrog
04-10-2002, 05:56 PM
You'll be fine - maybe increase front resistance another time if you find it to get too much - it's OK though - who needs rear tyres in a FWD racecar?