PDA

View Full Version : Summit school race video


MadFrog
03-25-2005, 10:32 AM
Race (http://www.sirrommotorsports.com/photopost/data/500/420Race.wmv)


PLEASE RIGHT-CLICK and Save As.
emwavey
03-25-2005, 10:57 AM
Thanks for sharing.
gsbaker
03-25-2005, 01:39 PM
Nicely done.

------------------
Gregg Baker, P.E.
Isaac, LLC
http://www.isaacdirect.com
lateapex911
03-25-2005, 10:14 PM
Wow...great vid quality! tell us about your set up and software. And...what car and motor do you have...and what do you rev to?

(The 911 looked...umm...'perky'!)

------------------
Jake Gulick
CarriageHouse Motorsports
ITA 57 RX-7
New England Region
[email protected]

[This message has been edited by lateapex911 (edited March 25, 2005).]
Andy Bettencourt
03-25-2005, 10:52 PM
I want to guess! I think it's a ITA Honda Civic Si. Seemd to have some nice power compaered to SM etc.

Close?

AB

------------------
Andy Bettencourt
New England Region, R188967
www.flatout-motorsports.com (http://www.flatout-motorsports.com)
MadFrog
03-26-2005, 09:44 AM
Video setup: older Sony Digital 8 camcorder on an SVTEK mount. The software is whatever came with Windows XP (Windows Movie Maker).
For the car, yes, it's an ITA Civic Si, with a still green and not quite tuned Tom Blaney engine, a Quaife limited slip and 4.78 final drive. I rev it to 7000, sometimes 7200.
philstireservice
03-26-2005, 09:55 AM
For the car, yes, it's an ITA Civic Si, with a still green and not quite tuned Tom Blaney engine, a Quaife limited slip and 4.78 final drive. I rev it to 7000, sometimes 7200.[/B]

Just a curious question. What kind of break in did you do on your motor? Time? etc....
MadFrog
03-26-2005, 10:51 AM
Originally posted by philstireservice:
Just a curious question. What kind of break in did you do on your motor? Time? etc....

let it idle for about an hour. Then a whole weekend (about 150 track miles) at VIR short shifting at 6000rpm, running dyno oil. I then changed over to Mobil 1. This was my first weekend revving it to 7000rpm.
it still needs some fine tuning and an ECU program.
lateapex911
03-26-2005, 03:47 PM
Looks stout from a power standpoint.

good call AB....

------------------
Jake Gulick
CarriageHouse Motorsports
ITA 57 RX-7
New England Region
[email protected]
jimmy p
03-28-2005, 01:25 PM
Great video!
Bill Miller
03-30-2005, 11:04 AM
Looks nice! Boy, The Chute sure looks different since they cut back the bank/trees. Doesn't look anywhere near as hairy (although, I'm sure it still is, love that corner!).

------------------
MARRS #25 ITB Rabbit GTI (sold) | MARRS #25 HProd Rabbit
SCCA 279608
benspeed
03-30-2005, 02:41 PM
Very nice video - I haven't been to Summit before so this goes into my archive for review when I do go.

Were you able to plug your recorder into a VHS type jack on your computer and record the video with Windows media player? If so, I might be able to digitize some video.

Cheers,
MadFrog
03-30-2005, 04:01 PM
Originally posted by benspeed:
Very nice video - I haven't been to Summit before so this goes into my archive for review when I do go.

Were you able to plug your recorder into a VHS type jack on your computer and record the video with Windows media player? If so, I might be able to digitize some video.

Cheers,


my camera has a digital output (it's a Sony Digital 8 = records digitally on a Hi-8 tape) that i connected to a firewire port on the PC.
zooracer
04-02-2005, 01:10 AM
well that corvette didnt have too much on you on the straights.
And you walked by the miata like it was standing still...
Does this guy build suzuki swift motors?
matt
Tom Blaney
04-02-2005, 09:33 AM
Originally posted by zooracer:
well that corvette didnt have too much on you on the straights.
And you walked by the miata like it was standing still...
Does this guy build suzuki swift motors?
matt

Send me an e-mail, we can talk. I am also starting to build motors for the new civic and integras in ITA
Tom Blaney
[email protected]