View Full Version : Cage Fab in NE mass or S NH

01-14-2004, 11:04 AM
I need a roll cage fabricated and welded. Was hoping someone can give me a name and # of shop in northeast Mass or southern NH. Hopefully not one of those overpriced, they call someone else kind of shop.. THanks for any help..

01-14-2004, 01:12 PM
Chris Howard is the man you want to speak with, He has a small welding shop at his house.he's in Holliston.

he has done many cages in the NER. Great prices and fast


brian Mushnick

[This message has been edited by bgracing (edited January 14, 2004).]

Tom Blaney
01-14-2004, 04:07 PM
I agree with Brian, go to Chris Howard. He's the best.

01-14-2004, 05:10 PM
Add another vote for Chris Howard. I can provide many pics of his work if you want to see them.

01-14-2004, 07:57 PM
Dave Del Genio in Acworth NH did an AMAZING job on my cage (spec miata). His welding is exeptional, and the cage is great.

NER SM #12

01-14-2004, 08:36 PM
I would agree that "Chris Howard is the man"

He did all 3 of our ITB Audi's


01-14-2004, 10:39 PM
I'm going to plug Dave Woodle of DWW Motorsports again. Quite happy with what he did for me. If he were to tell me a car is safe, I wouldn't bother to look at it, I'd just get in and drive.

01-15-2004, 12:23 AM
Dave Woodle also (re)did my cage, and many of my friends. Did a great job. Much better than the previous cage in the car. Really thought out and he will not do anything that he would not drive himself.


01-15-2004, 10:41 AM
I'm going to put a plug in for Dave Patten in Dunbarton, NH. Does all work at his house. Usually pretty fast, and excellent work. He built two cages for me, and numerous other people (and he build his ground up GT4 Datsun 510).


01-16-2004, 11:50 AM
Its nice to get all these names, but can anyone supply me with phone numbers??? Ive called Chris Howard and left messages with no reply. HELP

01-16-2004, 09:31 PM
For Dave Woodle, call his cell - 508-254-4552.

01-17-2004, 05:01 AM
You might want to call John Weisberg 203-556-0427 or 203-380-8667. Lots of cages done in the NE and I'm sure you can get lots of references.

01-18-2004, 10:21 PM
Call Rick Currier @ C-Tech Racing Rentals
Holdernes, NH

He has all the tools and computerized equipment for bending and welding. He has many years expeience and has built all of the Squam Lakes' BMW's


01-19-2004, 11:28 PM
David Patten-603-774-6963. Excellent work & personaly tested by myself & Jeremy.